Page 2
Assemblers and other persons who are not employed by or otherwise directly affiliated with or autho- rized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service procedures.
For software version ASW 3.1, follow the instructions in chapter 3. Prerequisites The monitor should be installed according to chapter "Installation of monitor" in document Installation and Start-Up Instructions (SPB7-230.033.13...). Time required Approximately 1/2 hour for one CSE. Siemens-Elema AB SPB7-230.812.06 Page 1 of 2 Opdima® Solna, Sweden Rev. 01 03.03...
Page 6
1 - 2 General This page intentionally left blank. Opdima® SPB7-230.812.06 Page 2 of 2 Siemens-Elema AB Installation Rev. 01 03.03 SPS-UD Solna, Sweden...
Check that the settings are according to the table below: Horisontal Vertical Resolution 1280 1024 Frequency 85 Hz * any value Minimize the Mode Selection window by clicking the upper right corner again. Siemens-Elema AB SPB7-230.812.06 Page 1 of 2 Opdima® Solna, Sweden Rev. 01 03.03 SPS-UD Installation...
Select Others (use the menu button to move in the menu) and then press the "up" arrow button to activate. Select Status (use the menu button to move in the menu) and then press the "up" arrow button to activate. Siemens-Elema AB SPB7-230.812.06 Page 1 of 2 Opdima®...
Page 10
Horisontal Vertical Resolution 1280 1024 Frequency 85 Hz * any value Minimize the Mode Selection window by clicking the upper right corner again. Log out. Opdima® SPB7-230.812.06 Page 2 of 2 Siemens-Elema AB Installation Rev. 01 03.03 SPS-UD Solna, Sweden...