Datavideo DVK­100 Mk II Instruction Manual page 11

Dip Switch 1 : OFF = NTSC, ON = PAL output
2 : OFF = 0 IRE, ON = 7.5IRE input/output
3 : OFF = Fixed, ON = PAL/NTSC auto detection (Detected
from the CAM­1 / CAM­2 signal)
4, 5 : RESERVED
6 : OFF = VIDEO, ON = COLOR BAR
Cooling Fan. Please ensure that there is free air flow available around the fan.
Blocking the fan may cause the unit to overheat.
The DVK­100 can be fully controlled via RS232 please refer to the RS 232
protocols on page 28 for further details.
The DVK­100 can be switched via GPI trigger.
Using the GPI In socket you can switch from CAM­1 (Green) to CAM­2 (Blue)
remotely (via a 3.5mm cable with latching switch)
The GPI Out Socket allows the DVK­100 to switch external devices.
The GPI Sockets are also used to connect the Datavideo TD­1 Light Ring
Controller. The TD­1 can switch the DVK­100 from CAM­1 (Green) to CAM­2
(Blue), or the TD­1 can be controlled from the DVK­100. Please see Using the
DVK­100 Mk II with the Datavideo TD­1.
11