To grab the freeze frame image press the Still button. The Still button will be illuminated
red, it will remain red while the freeze frame is being held. You will see the Foreground
or Background image freeze on the output monitor.
N.B. The colour processor adjustments will not function if you are holding a freeze frame.
To release the freeze frame and return to running video, press the Still button again –
the LED should go out.
GPI Control
The DVK100 has a GPI In and Out port.
The GPI In will allow remote switching between the CAM1 and CAM2 Inputs.
The GPI In Socket is 3.5mm. Wire a cable as follows:
If the switch is closed the DVK100 will switch to CAM1, if the switch is open it will switch to CAM2.
The GPI Out Socket will replicate the GPI In socket, like a loop through. You could use this to control a
second device simultaneously; or maybe to remotely monitor which channel is active (CAM1 or CAM2)
The GPI Out will also switch when the CAM1 or CAM2 buttons are pressed, CAM1 is open circuit, CAM2
is closed circuit. It would be possible to use the GPI Out to start / stop a device each time you switch from
CAM1 to CAM2, or possibly switch devices.
27