Datavideo DVK­100 Mk II Instruction Manual page 30

DVKCMD_Get/SetWindowBorder 82/83
DVKCMD_Get/SetBlankColor
Specifications
Input
3 Inputs:
CAM­1 / CAM­2 INPUT
BG INPUT
Each input has selectable Composite or Y/C signal:
Y/C In
Composite In
Output
Simultaneous output
1Y/C Out
2 Composite Out
Output modes
FG or FG with BG
Loop through out
Video Processing
Component
Frame Synchronization
Frequency Response (S input)
DG, DP
S/N Ratio
General
Power Input
RS232 & GPI interface
Ambient Temperature
Ambient Humidity
DIP switch description
1 : OFF – NTSC, ON – PAL output
2 : OFF – 0 IRE, ON – 7.5IRE input/output
3 : OFF – Fixed, ON – PAL/NTSC auto detection (According to FG)
4, 5 : RESERVED
6 : OFF – VIDEO, ON – COLOR BAR
86/87
30
BorderOn/Off 30=off / 31=on
R(int2=0~100)def=0
G(int2=0~100) def=70
B(int2=0~100) def=70
For foreground use (FG)
For background use (BG)
4­pin 75 ohm DIN Connector
75 ohm RCA connector, level: 1.0Vp­p
4­pin 75 ohm DIN Connector
75 ohm RCA Connector, level: 1.0Vp­p
Choose Chroma key ON or OFF
Composite Out from Y/C or Composite In
Y/C Out from Y/C In only
8­bit, 4:2:2, Y: 13.5MHz
Two Channel Full Frame TBC
5.0 MHz +/­3dB
+/­ 3%, 3°
>50 dB
DC 12V/1.5A (AC adapter included)
for remote control
32° ­ 122° F (0° ­ 50° C)
Less than 90%