Routine Maintenance - Cecilware MT-2-ULAF Operator's Manual

Autofill Switch (located on the rear cover of each bowl)
in position II, until full strength beverage outflows.
Set the unit Power Switch to position 0 and drain all the
liquid from the bowl.
g -Set the unit Power Switch to position I. Manually
energize the Autofill Device, by keeping pushed the
Autofill Switch (located on the rear cover of each bowl)
in position II, dispense a cup of beverage and check its
taste.
h -If not satisfactory, drain all the liquid from the bowl and
repeat point G until obtaining a satisfactory tasting
drink.Note: the above Autofill System In Place
Sanitization must be followed by unit cleaning and
sanitization as described in standard unit Operator's
Manual.

8. 4 ROUTINE MAINTENANCE

Daily: inspect the machine for signs of product leaks past seals
and gaskets. If proper assembly does not stop leaks around
seals or gaskets, check for improper lubrication, worn or
damaged parts. Replace parts as needed.
IMPORTANT
Weekly: inspect the contact between the clip probe and
the rear wall. Keep it clean and free from sugar or dust
Ugolini spa
MT UL AF
13