Table of Contents
Advertisement
[IN/OUT SELECT]
Item
[HD-SDI 3G SDI]
[HD SDI1 OUT FMT]
[HD-SDI1 CHAR]
[HD-SDI OUT ITEM]
[4K-SDI S-LINK]
[8K-SDI OUT TYPE]
[4K-SDI OUT TYPE]
[4K-SDI 3G SDI]
[HD PROMPT SEL]
[GEN-LOCK]
[8K H PHASE-COARSE] Roughly adjusts the phase of the horizontal synchronization signal of 8K output signals.
[8K H PHASE-FINE]
[4K H PHASE-COARSE] Roughly adjusts the phase of the horizontal synchronization signal of 4K output signals.
[4K H PHASE-FINE]
[HD H PHASE-COARSE] Roughly adjusts the phase of the horizontal synchronization signal of HD output signals.
[HD H PHASE-FINE]
[PROTCOL]
[TRUNK 1]
[TRUNK 2]
Chapter 4 Menu Operations — Menu list (AK-SHU800)
Sets the output format from the <SDI OUT 1> to <SDI OUT 4> terminals when [PIXEL] is [1080] and output
format from the <HD SDI OUT 1> terminal when ［HD SDI1 OUT FMT］ is ［1080/59.94p］ or ［1080/50p］ .
[LEVEL-A], [LEVEL-B]
f Factory setting: [LEVEL-A]
Sets the output format of the <HD SDI OUT 1> terminal.
When [MAIN MENU] → [SYSTEM MODE] → [FREQUENCY] is [59.94]
[1080/59.94p], [1080/59.94i]
When [MAIN MENU] → [SYSTEM MODE] → [FREQUENCY] is [50]
[1080/50p], [1080/50i]
f Factory setting: [1080/59.94p] (AK-SHU800PS), [1080/50p] (AK-SHU800E)
Sets if the character is imposed to the output image of the <HD SDI OUT 1> terminal.
[OFF], [ON]
f Factory setting: [OFF]
Sets the content of the character superimposed to the output image from the <HD SDI OUT 1>/<HD SDI
OUT 2> terminal.
[MENU ONLY]: Displays only the menu.
[STATUS]: Displays the menu and status.
f Factory setting: [MENU ONLY]
Switches the 4K signals from the <SDI OUT 1> to <SDI OUT 4> terminals when [PIXEL] is 2160.
[OFF]: Outputs the 3G SDI signal.
[ON]: Outputs the 12G SDI signal.
f Factory setting: [ON]
Sets the output format of 8K signals output from the <SDI OUT 1> to <SDI OUT 4> terminals when [PIXEL]
is 4320.
[SQUARE], [2 SAMPLE INT]
f Factory setting: [2 SAMPLE INT]
Sets the output format of 4K signals output from the <SDI OUT 1> to <SDI OUT 4> terminals when [PIXEL]
is 2160.
[SQUARE], [2 SAMPLE INT]
f Factory setting: [2 SAMPLE INT]
Sets the output format for 4K SDI 3G output.
[LEVEL-A], [LEVEL-B]
f Factory setting: [LEVEL-A]
Selects the signal output from the <HD SDI PROMPT OUT> terminal on the camera.
[HD SDI 2]: The signal output is the same signal as that output from the <HD SDI 2> terminal.
[HD PROMPT]: This outputs signals input to the <HD SDI PROMPT IN> terminal.
f Factory setting: [HD PROMPT]
[−5]...[+5]
f Factory setting: [0]
Finely adjusts the phase of the horizontal synchronization signal of 8K output signals.
[−100]...[+100]
f Factory setting: [0]
[−5]...[+5]
f Factory setting: [0]
Finely adjusts the phase of the horizontal synchronization signal of 4K output signals.
[−100]...[+100]
f Factory setting: [0]
[−5]...[+5]
f Factory setting: [0]
Finely adjusts the phase of the horizontal synchronization signal of HD output signals.
[−100]...[+100]
f Factory setting: [0]
Sets the protcol of the <TRUNK 1> terminal.
[RS422], [RS232C]
f Factory setting: [RS422]
Sets the protcol of the <TRUNK 2> terminal.
[RS422], [RS232C]
f Factory setting: [RS422]
– 68 –
Description of settings
Advertisement
Table of Contents
