5. 4K Photo and Drive Settings
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
1
Press 4 (
2
Press 2/1 to select the drive mode, and
then press [MENU/SET].
1 [Single]
2 [Burst]
(P87)
3 [4K PHOTO]
4 [Post Focus]
5 [Auto Bracket]
6 [Self Timer]
To cancel the drive mode
∫
Select [
] ([Single]) or [
• The self-timer can also be cancelled by turning off the camera. (When [Self Timer Auto Off]
(P136)
is set to [ON])
).
When the shutter button is pressed, only one picture is
recorded.
Recordings are made in succession while the shutter
button is pressed.
When the shutter button is pressed, a 4K photo is
(P76)
recorded.
When the shutter button is pressed, Post Focus
(P83)
recording is performed.
Each time the shutter button is pressed, recordings
(P89)
are made with different exposure settings according to
the Exposure Compensation range.
When the shutter button is pressed, recording takes
(P91)
place after the set time has elapsed.
2
] in step
.
86