Table of Contents
Advertisement
[DATE/TIME]
Item
[PRESENT]
[DATE YY]
[DATE MM]
[DATE DD]
[TIME HH]
[TIME MM]
[SET EXECUTE]
[RESET]
[INITIALIZE]
In the following cases, the unit is starting up, so Item cannot be selected. This is not an error. Perform operation after a while.
f Immediately after turning on the power
f After switching [FREQUENCY] between 59.94 and 50
f After switching [PIXEL]
Item
[MENU INITIALIZE]
[ABB INITIALIZE]
[READ USER ALL DATA]
[READ FACTORY ALL DATA]
[UPDATE]
[UPDATE] cannot be selected right after the power is turned on, because boot of the camera is in progress. This is not an error. Perform operation after
a while.
Item
[UPDATE]
Chapter 4 Menu Operations — Menu list (AK-SHU800)
Displays the present date and time.
Sets the year.
[18]...[99]
f Factory setting: [19]
Sets the month.
[01]...[12]
f Factory setting: [01]
Sets the day.
[01]...[31]
f Factory setting: [01]
Sets the hour.
[00]...[23]
f Factory setting: [00]
Sets the minute.
[00]...[59]
f Factory setting: [00]
Selects whether to save the configured details.
[NO], [YES]
f Factory setting: [NO]
Selects whether to reset the settings.
[NO], [YES]
f Factory setting: [NO]
Restores the value of [MAIN MENU] to their factory settings.
[YES], [NO]
Restores the value of [ABB] to their factory settings.
[YES], [NO]
Restores the values of [MAIN MENU], scene file and user file to their factory settings.
[YES], [NO]
Restores the values of [MAIN MENU], scene file, user file, and the factory adjusted values to their factory
settings.
[YES], [NO]
Updates the software.
f Execute the update of the software with the update image file stored in the SD memory card.
f The busy lamp (next to the SD memory card slot) flashes during the update of software is executing.
[YES], [NO]
f Factory setting: [NO]
@
NOTE
t When updating, make sure you first connect the camera and the IPU with an optical fiber cable.
– 73 –
Description of settings
Description of settings
Description of settings
Advertisement
Table of Contents
