[Network Setup]; [File] - Panasonic AK-SHB800G Operating Manual

[NETWORK SETUP]

[NETWORK SETUP] cannot be selected immediately after turning on the power or after switching [FREQUENCY] between 59.94 and 50 because the
unit is starting up.
This is not an error. Perform operation after a while.
Item
[ ] [
LAN PROPERTY IP ADDRESS
[SUBNET MASK]
[
DEFAULT GATEWAY
[
ROI PORT
[
ROP PORT
[
SET EXECUTE
[
MAC ADDRESS
[ ] [
USER ACCOUNT LIST

[FILE]

[SD CARD]
[SD CARD] cannot be selected right after the power is turned on, because boot of the camera is in progress. This is not an error. Perform operation after
a while.
@ NOTE
t Memory cards used with the unit should conform to SD, SDHC or SDXC standards.
Item
[MODE]
[FILE SEL]
[FILE NO.]
[FILE NAME]
[SD FILE NO.]
[EXECUTE]
Chapter 4 Menu Operations — Menu list (AK-SHU800)
] Sets the IP address.
f Factory setting: [192.168.0.30]
Sets the subnet mask.
f Factory setting: [255.255.255.0]
] Sets the default gateway.
f Factory setting: [192.168.0.1]
] Sets the port number when connecting to ROI. The setting is updated when the power is restarted.
[49352], [49400]...[49499]
f Factory setting: [49352]
]
Sets the port number when connecting to ROP. The setting is updated when the power is restarted.
[49152], [49200]...[49299]
f Factory setting: [49152]
] Selects whether to execute with the configured settings.
[NO], [YES]
f Factory setting: [NO]
] Displays the MAC address. (This cannot be changed.)
] Displays the list of the registered users.
Selects the operation mode.
[FORMAT], [LOAD], [STORE]
f Factory setting: [LOAD]
Selects a file.
[SCENE], [USER], [LENS], [ACCOUNT]
f Factory setting: [SCENE]
Selects a file number.
SCENE file: [CURRENT], [1]...[8]
USER file: [1]...[3]
LENS file: [1]...[32]
ACCOUNT file: [1]
f Factory setting: [1]
Enters a file name. (15 characters or less)
f Factory setting: [SCENE1]
Selects the file number of the SD memory card.
[1]...[100]
f Factory setting: [1]
Selects whether to execute with the configured settings.
[NO], [YES]
f Factory setting: [NO]
Description of settings
Description of settings
– 69 –