Table of Contents
Advertisement
On-screen displays of the monitor
The setting and the operation status of the camera are displayed in the monitor screen.
All items that can be displayed are located as follows.
1
6
1 System mode display
Indicates pixels and the system frequency.
f [4320/59.94p]
f [4320/50p]
f [2160/59.94p]
f [2160/50p]
f [1080/59.94p]
f [1080/50p]
2 Tally display
This is displayed when a tally signal is sent.
3 Warm up warning
This is displayed when the internal temperature is low.
4 Warning
Displayed when there is an abnormality with the condition of the device.
5 Focus assist magnification display
The focus assist magnification display function is displayed while active.
6 ND filter display
Indicates the selected ND filter value.
f [1]
f [2]
f [3]
f [4]
7 Color temperature display
Indicates the color temperature that is set on the camera.
This can be either the memory value when automatic white balance is performed or the value configured in the menu.
8 Shutter speed display
Current shutter speed is displayed.
▶ is displayed only when synchro shutter is on.
9 Master gain display
Current gain value is displayed.
f [−6dB] to [24dB]
10 Frame mix (total gain) display
The value of total gain is displayed when it is operating.
f [+6dB]/[+12dB]
11 Digital extender display
Displayed when the digital extender is being used.
12 Iris display
The iris setting (F value) is displayed. The F value is an approximate value.
13 Zoom position display
Indicates the zoom position.
f [00] to [99]
NOTE
@
t The factory default is fixed to OFF.
Chapter 3 Operation — On-screen displays of the monitor
2
3
4
WRN
15
7
8
18
9
10
11
– 22 –
5
＊
16
17
12
13
14
Advertisement
Table of Contents
