Table of Contents
Advertisement
[WHITE CLIP]
Item
[WHITE CLIP]
[MASTER WHITE CLIP LEVEL]
[R WHITE CLIP LEVEL]
[B WHITE CLIP LEVEL]
[HI-COLOR]
[HI-COLOR LEVEL]
[DETAIL SETTING]
Item
[DETAIL]
[MASTER DETAIL]
[H DETAIL LEVEL]
[V DETAIL LEVEL]
[PEAK FREQUENCY]
[V DETAIL FREQUENCY]
[CRISP]
[DETAIL CLIP+]
[DETAIL CLIP−]
[KNEE APERTURE LEVEL]
[LEVEL DEPENDENT SWITCH]
[LEVEL DEPENDENT]
[DARK DETAIL SWITCH]
[DARK DETAIL]
Chapter 4 Menu Operations — Menu list (AK-SHU800)
Enables/disables the white clip function.
[OFF], [ON]
f Factory setting: [ON]
Sets the white clip level.
[80%]...[109%]
f Factory setting: [109%]
Adjusts red to [MASTER WHITE CLIP LEVEL].
[−15%]...[+15%]
f Factory setting: [0%]
Adjusts blue to [MASTER WHITE CLIP LEVEL].
[−15%]...[+15%]
f Factory setting: [0%]
Sets whether to improve the color reproduction in high-luminance areas.
[OFF], [ON]
f Factory setting: [OFF]
Sets the level of the mode that expands the color dynamic range.
[1]...[32]
f Factory setting: [32]
Enables/disables all detail functions.
[OFF], [ON]
f Factory setting: [ON]
Sets the master detail.
[−31]...[+31]
f Factory setting: [0]
Sets the correction level of the horizontal detail.
[00]...[63]
f Factory setting: [20]
Sets the correction level of the vertical detail.
[00]...[63]
f Factory setting: [32]
Sets the peak frequency of the horizontal detail.
[0]...[4]
f Factory setting: [3]
Sets the vertical detail frequency.
[0]...[4]
f Factory setting: [3]
Sets the detail signal noise removal level.
[00]...[63]
f Factory setting: [5]
Adjust the detail clip to reduce glare produced by an excess of details.
[00]...[63]
f Factory setting: [00]
Adjusts the length of the undershoot of the detail edge component.
[00]...[63]
f Factory setting: [00]
Adjusts the knee aperture level.
[00]...[39]
f Factory setting: [00]
Enables/disables the function to remove details of dark areas.
[OFF], [ON]
f Factory setting: [ON]
Sets the level to remove details of dark areas.
[00]...[15]
f Factory setting: [8]
Enables/disables the function to emphasize details of dark areas.
This cannot be set when HDR SW
[OFF], [ON]
f Factory setting: [OFF]
Sets the level to emphasize details of dark areas.
[00], [7]
f Factory setting: [00]
– 52 –
Description of settings
Description of settings
(MAIN)
is ON.
Advertisement
Table of Contents
