Table of Contents
Advertisement
RB gain control function
This is a function to set to add or reduce intensity of red and blue. This operates with automatic white balance.
r General settings
Use the camera with the factory settings.
r Advanced settings
Set in [MAIN MENU] → [PAINT (MAIN)], [PAINT (DC-HD)]→ [RB GAIN CONTROL SETTING].
f When [RB GAIN PRESET] is selected
[R GAIN]: Sets to add or reduce intensity in red.
[B GAIN]: Sets to add or reduce intensity in blue.
f When [RB GAIN] is selected
[R GAIN]: Sets to add or reduce intensity in red.
[B GAIN]: Sets to add or reduce intensity in blue.
[GAIN OFFSET]: Sets whether to maintain the value set in [R GAIN] and [B GAIN], or to reset when the automatic white balance is performed.
Chroma setting function
This function sets color saturation and phase. It applies effects on whole images. It cannot be set to individual color hue.
r General settings
[CHROMA LEVEL]: Sets the chroma level for the P
When the vector scope is used, the distance from the center (no color) increases or decreases in the whole image.
r Advanced settings
No setting items are provided.
Matrix function
This function sets the image color representation by selecting the matrix table.
If the settings are changed, the representation of all the colors in the image will also be changed.
MATRIX R-B
MATRIX B-R
MATRIX B-G
MATRIX G-B
r General settings
[MATRIX]: Enables the matrix function and represents the color at the time of shooting.
r Advanced settings
Set in [MAIN MENU] → [PAINT (MAIN)], [PAINT (DC-HD)] → [LINEAR MATRIX].
It performs the fine adjustment relatively against the matrix table selected in [LINEAR TABLE]. (Fig. 1)
(Example) When [MATRIX (R-G)_P] is adjusted to the positive side and [MATRIX (B-G)_N] is adjusted to the negative side (Fig. 2)
Chapter 3 Operation — Image quality adjustment
signal and the P
R
MATRIX R-G MATRIX G-R
MATRIX G-B
R
Mg
Yl
B
G
Cy
MATRIX R-B
MATRIX G-R MATRIX R-G
Fig. 1
signal.
B
MATRIX B-G
MATRIX B-R
– 30 –
R
Mg
Yl
B
G
Cy
Fig. 2
Advertisement
Table of Contents
