Panasonic AK-SHB800G Operating Manual

8k multi purpose camera, image processing unit

Hide thumbs Also See for AK-SHB800G:

Operating instructions manual (44 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

Operating Guide

Refer to this document when connecting a 8K Multi Purpose Camera (AK-SHB800)

and Image Processing Unit (AK-SHU800) for use.

PSJ

W0819GU0 -FJ

8K Multi Purpose Camera

AK-SHB800G

Model No.

AK-SHB800PS

Model No.

Image Processing Unit

AK-SHU800PS

Model No.

AK-SHU800E

Model No.

ENGLISH

DVQP2086ZA

Table of Contents

Summary of Contents for Panasonic AK-SHB800G

Page 1 Operating Guide 8K Multi Purpose Camera AK-SHB800G Model No. AK-SHB800PS Model No. Image Processing Unit AK-SHU800PS Model No. AK-SHU800E Model No. Refer to this document when connecting a 8K Multi Purpose Camera (AK-SHB800) and Image Processing Unit (AK-SHU800) for use.
Page 2 Remote operation panel is referred to as “ROP”. For the purposes of this manual, the model numbers of the units are given as listed in the table below. Model number of unit Model number given in manual AK-SHB800G AK-SHB800 AK-SHB800PS AK-SHU800PS...
Page 3: Table Of Contents
Contents Contents [SYSTEM MODE] Chapter 1 Overview [IN/OUT SELECT] [NETWORK SETUP] Before using the camera [FILE] Notes [MAINTENANCE] Required environment for computer [DIAGNOSTIC] Disclaimer Notes regarding network Chapter 5 Connecting to External Devices Memory cards (IPU only) Using the camera in a system Connecting the remote operation panel (AK-HRP1000) Basic configuration devices Serial connection with the <ROP>...
Page 4: Chapter 1 Overview
Overview Chapter 1 Before using the camera, read this chapter.
Page 5: Before Using The Camera
For details on these descriptions (originally provided in English) and how to obtain the source code, visit the following website. https://pro-av.panasonic.net/ However, do not contact Panasonic for questions regarding obtained source codes. With the exception of open source software licensed according to GPL/LGPL and other similar licenses, distributing, copying, disassembling, reverse compiling, and reverse engineering of software provided with the unit are expressly prohibited.
Page 6: Notes
Disclaimer In any case, Panasonic will not liable for any of the following: f Incidental, special, or consequential damage or harm caused directly or indirectly in regard to the camera f Trouble or malfunctions caused by the misuse or careless use of a user...
Page 7: Using The Camera In A System
8K images. NOTE Software key AK-SFC101 t For details, visit the following website. https://pro-av.panasonic.net/ System block diagram NOTE t Use the following cables for connection. Optical fiber cable for connecting AK-SHB800 and AK-SHU800: Single-mode optical fiber cable...
Page 8 Chapter 1 Overview — Using the camera in a system Configuration for outputting 8K and HD EF LENS AK-SHB800PS OPT IN OPT OUT AK-SHB800G DC IN AK-SHU800E AC IN OPT OUT OPT IN 3G AC IN 〜 HD SDI OUT 1 1.5G HD SDI OUT HD SDI PROMPT 75Ω AUTO SDI OUT HD SDI OUT 2...
Page 9 Chapter 1 Overview — Using the camera in a system Configuration for outputting 4K and HD (Example 1) EF LENS AK-SHB800PS OPT IN OPT OUT AK-SHB800G DC IN AK-SHU800E AC IN OPT OUT OPT IN 3G AC IN 〜 HD SDI OUT 1 AK-SHU800PS 1.5G HD SDI OUT HD SDI PROMPT 75Ω...
Page 10 Chapter 1 Overview — Using the camera in a system Configuration for outputting 4K and HD (Example 2) EF LENS AK-SHB800PS OPT IN OPT OUT AK-SHB800G DC IN AK-SHU800E AC IN OPT OUT OPT IN 3G AC IN 〜 HD SDI OUT 1 AK-SHU800PS 1.5G HD SDI OUT HD SDI PROMPT 75Ω...
Page 11 Chapter 1 Overview — Using the camera in a system Configuration for outputting HD EF LENS AK-SHB800PS OPT IN OPT OUT AK-SHB800G DC IN AK-SHU800E AC IN OPT OUT OPT IN 3G AC IN 〜 HD SDI OUT 1 AK-SHU800PS 1.5G HD SDI OUT HD SDI PROMPT 75Ω AUTO SDI OUT HD SDI OUT 2...
Page 12 Chapter 1 Overview — Using the camera in a system Configuration for HD ROI control EF LENS AK-SHB800PS OPT IN OPT OUT AK-SHB800G DC IN AK-SHU800E AC IN OPT OUT OPT IN 3G AC IN 〜 HD SDI OUT 1 1.5G AK-SHU800PS HD SDI OUT HD SDI PROMPT 75Ω AUTO SDI OUT HD SDI OUT 2...
Page 13: Accessories
Chapter 1 Overview — Accessories Accessories 8K Multi Purpose Camera AK-SHB800 Mount cap (already attached to the product) Flange nut (x 2) Wire mounting screws (x 4) Image Processing Unit AK-SHU800 Power cable ● for AK-SHU800PS (x 1) ● for AK-SHU800E (x 2) Rack mount adaptors (x 2) (already attached to the product) NOTE t After removing the product from its container, dispose of the power cable cap (if supplied) and packing materials in an appropriate manner.
Page 14: Chapter 2 Description Of Parts
Description of Parts Chapter 2 This chapter describes the names of the parts, functions, and operations of this camera and Image Processing Unit (IPU).
Page 15: 8K Multi Purpose Camera Ak-Shb800
Chapter 2 Description of Parts — 8K Multi Purpose Camera AK-SHB800 8K Multi Purpose Camera AK-SHB800 Front side 1 Lens mount (EF mount) This is where the lens is mounted. 2 Front tally lamp Lights up when the tally signal is supplied. Blinks in red while displaying warning, and blinks in green during the firmware update.
Page 16: Left Side
Chapter 2 Description of Parts — 8K Multi Purpose Camera AK-SHB800 Left side Φ 1 < > mark Indicates the imaging plane inside the camera. 2 Handle fitting Right side Φ 1 Handle fitting 2 < > mark Indicates the imaging plane inside the camera. –...
Page 17: Rear Side
Chapter 2 Description of Parts — 8K Multi Purpose Camera AK-SHB800 Rear side AK-SHB800G AK-SHB800PS 1 <OPT IN> terminal Connect to the <OPT OUT> terminal on the IPU using an optical fiber cable. NOTE t There is a protective cap on the terminal. Remove it before use.
Page 18: Upper Side
Chapter 2 Description of Parts — 8K Multi Purpose Camera AK-SHB800 Upper side 1 Mounting screw holes This is used when installing in a camera housing, etc. f Mounting hole size - 3/8-16 UNC (x 9) NOTE t Depth of the screw hole is 8 mm. Use mounting screws 8 mm or shorter. 2 Drop prevention wire mounting screw hole f Mounting hole size - M4...
Page 19: Image Processing Unit Ak-Shu800
Chapter 2 Description of Parts — Image Processing Unit AK-SHU800 Image Processing Unit AK-SHU800 Front panel TALLY CAMERA No. STATUS G/L ON ALARM MENU USER 1 POWER FRONT REAR SELECT USER 2 OPTICAL LEVEL 2 3 4 5 1 <POWER> switch This is the unit’s power switch.
Page 20: Rear Panel
Chapter 2 Description of Parts — Image Processing Unit AK-SHU800 Rear panel AK-SHU800PS AK-SHU800E AC IN 〜 HD SDI OUT HD SDI PROMPT 75Ω AUTO SDI OUT SIGNAL GND RESERVE TRUNK COMMUNICATION 1 <HD SDI OUT 1> terminal This is the main line output terminal dedicated for HD SDI. <HD SDI OUT 2>...
Page 21: Chapter 3 Operation
Operation Chapter 3 This chapter describes the operation of this camera.
Page 22: On-Screen Displays Of The Monitor
Chapter 3 Operation — On-screen displays of the monitor On-screen displays of the monitor The setting and the operation status of the camera are displayed in the monitor screen. All items that can be displayed are located as follows. ＊ 1 System mode display Indicates pixels and the system frequency.
Page 23 Chapter 3 Operation — On-screen displays of the monitor 14 Focus position display Indicates the focus position. f [00] to [99] NOTE t The factory default is fixed to OFF. 15 Level gauge display Displays the tilt of the camera in horizontal direction or vertical direction. 16 Abnormal temperature warning This is displayed when the temperature of the unit is abnormal and just before the power is to be forcibly shutdown when the temperature is abnormal.
Page 24: Data
Chapter 3 Operation — Data Data The following shows the data handled in the camera. Managed system Name Quantity Description component Camera User file 1 - 3 These files contain equipment configuration data held by the camera, set in [MAIN MENU]. The data is managed by the camera.
Page 25: Operation Procedure
Chapter 3 Operation — Operation procedure Operation procedure Turn on the power of each device. Illuminate the subject appropriately. Adjust the white balance. This is necessary when the camera is used for the first time or when it was not used for a long time. This is necessary when the illumination condition or the brightness has changed.
Page 26: Adjustment For Shooting
Chapter 3 Operation — Adjustment for shooting Adjustment for shooting White balance adjustment Adjust the white balance by shooting a white subject in 50% or more of the screen. ([SWITCH MODE] → [W/B BAL SETTING]) (Page 46) The white balance adjustment may not function correctly when the signal level of white is 100% or more, or 50% or less. Black balance adjustment Adjust with light completely shut out, such as by putting the cap on the lens.
Page 27: Shutter Mode/Speed Setting
Chapter 3 Operation — Adjustment for shooting Shutter mode/speed setting It is possible to limit the range of shutter speed selection or to use the synchro scan mode in advance with [MAIN MENU] → [SWITCH MODE] → [SHUTTER SPEED] → [SHUTTER SPEED]/[SHUTTER MODE]. The selected shutter speed will be maintained even after the power of the unit is turned off.
Page 28: Image Quality Adjustment
Chapter 3 Operation — Image quality adjustment Image quality adjustment Each FORMAT can have its picture quality adjusted individually with this unit with [MAIN MENU] → [PAINT (MAIN)] and [PAINT (DC-HD)]. f When 4320 is selected in [MAIN MENU] → [SYSTEM MODE] → [PIXEL] 8K image quality can be adjusted in the [PAINT (MAIN)] menu and HD image quality can be adjusted in the [PAINT (DC-HD)] menu.
Page 29: Skin Tone Function
Chapter 3 Operation — Image quality adjustment Skin tone function This function makes human skin look smoother in images. [I WIDTH] Q axis [I CENTER] [Q WIDTH] B-Y/0° [Q PHASE] I axis Fig. 1 r General settings [SKIN TONE EFFECT MEMORY]: Select from three data for which skin tone to perform the skin tone detail function. It can be set alone or in combination.
Page 30: Rb Gain Control Function
Chapter 3 Operation — Image quality adjustment RB gain control function This is a function to set to add or reduce intensity of red and blue. This operates with automatic white balance. r General settings Use the camera with the factory settings. r Advanced settings Set in [MAIN MENU] →...
Page 31: Color Correction Function
Chapter 3 Operation — Image quality adjustment Color correction function This function sets color saturation and phase. It applies individual effect on 12 phases in an image. It can be set to individual color hue. Yl-R R-Mg PHASE G-Yl Mg-B Cy-G B-Cy r General settings...
Page 32: Knee Function
Chapter 3 Operation — Image quality adjustment Knee function This function sets the compression of video signals to prevent halation in images. r General settings Use the camera with the factory settings. r Advanced settings Set in [MAIN MENU] → [PAINT (MAIN)], [PAINT (DC-HD)] → [KNEE]. f When [ON] is selected in [MAIN MENU] →...
Page 33: Multi-Formats
Chapter 3 Operation — Multi-formats Multi-formats You can select the image output format from the IPU in [MAIN MENU] → [SYSTEM MODE] → [FREQUENCY] and [PIXEL]. f The output from the <SDI OUT 1> to <SDI OUT 4> terminals and <HD SDI OUT 1> terminal are used for the main line. f The output from the <HD SDI OUT 2>...
Page 34: List Of Output Formats ( To Terminals)
Chapter 3 Operation — Multi-formats List of output formats (<SDI OUT 1> to <SDI OUT 4> terminals) Use following BNC cable in accordance to the signal to be output. f 12G signal: 12G BNC cable f Signal other than above: 5C-FB or higher BNC cable f [4K-SDI S-LINK] and [4K-SDI OUT TYPE] of [IN/OUT SELECT] are displayed as [----], and cannot be selected.
Page 35: List Of Output Formats (/ Terminals)
Chapter 3 Operation — Multi-formats List of output formats (<HD SDI OUT 1>/<HD SDI OUT 2> terminals) [MAIN MENU] <HD SDI OUT 1>/<HD SDI OUT 2> terminal SYSTEM MODE IN/OUT SELECT PIXEL FREQUENCY HD-SDI 1 OUT FMT 1080/59.94p 1080/59.94p (3G) 59.94 1080/59.94i (1.5G) 1080/59.94i...
Page 36: Convenient Shooting Functions
Chapter 3 Operation — Convenient shooting functions Convenient shooting functions Scan reverse shooting Image can be displayed reversed vertically or horizontally by setting [MAIN MENU] → [SYSTEM MODE] → [SCAN REVERSE]. NOTE t When 1080 is selected in [MAIN MENU] → [SYSTEM MODE] → [PIXEL] Scan reverse does not work on the CROP images from the 〈SDI OUT1〉...
Page 37: Color Bar
Chapter 3 Operation — Convenient shooting functions Color bar The color bar convenient to adjust the image quality of a TV or an external monitor can be displayed. Five types of color bar type ([FULL]/[SMPTE]/[ARIB]/[UHDTV CB]/[UHDTV CB LIGHT]) can be selected in [MAIN MENU] → [SWITCH MODE] → [BAR SETTING] →...
Page 38: Chapter 4 Menu Operations
Menu Operations Chapter 4 This chapter describes how to operate the camera menus and the structure and details of the setting menu.
Page 39: Menu Operations (Ak-Shu800)
Chapter 4 Menu Operations — Menu operations (AK-SHU800) Menu operations (AK-SHU800) Basic operations <MENU> botton MAIN MENU(1/2) DISPLAY SETUP SWITCH MODE PAINT(MAIN) PAINT(DC-HD) MENU USER 1 FRONT PAINT(CROP) REAR SYSTEM MODE SELECT USER 2 IN/OUT SELECT Fig. 1 <SELECT> dial DISPLAY SETUP DSP SETUP>MARKER (1/4) MARKER...
Page 40 Chapter 4 Menu Operations — Menu operations (AK-SHU800) Entering characters FILE>SCENE FILE FILE>SCENE FILE MODE STORE MODE STORE FILE SEL SCENE FILE SEL SCENE FILE NO. FILE NO. FILE NAME :SCENE1 FILE NAME :SCENE1 1．SCENE1 1．SCENE1 2．SCENE2 2．SCENE2 3．SCENE3 3．SCENE3 4．SCENE4 4．SCENE4 5．SCENE5...
Page 41: Menu Configuration (Ak-Shu800)
Chapter 4 Menu Operations — Menu configuration (AK-SHU800) Menu configuration (AK-SHU800) [MAIN MENU] [DISPLAY SETUP] Configures the setting regarding what to be displayed in the monitor. [SWITCH MODE] Configures the function assigned to the switch. [PAINT (MAIN)] Configures the images output from <SDI OUT 1> to <SDI OUT 4>. When pixels are set to either 1080, the images output from <HD SDI 1>...
Page 42: Menu List (Ak-Shu800)
Chapter 4 Menu Operations — Menu list (AK-SHU800) Menu list (AK-SHU800) : Can be saved and loaded as a scene file data. : Can be saved and loaded as a user file data. [DISPLAY SETUP] [MARKER] Item Description of settings [FOCUS ASSIST SW] Enables/disables the focus assist switch.
Page 43 Chapter 4 Menu Operations — Menu list (AK-SHU800) Item Description of settings [USER BOX] — Shows/hides the user box. [OFF], [ON] f Factory setting: [OFF] [MEMORY SELECT] Configures the memory of the user box. [1], [2], [3] f Factory setting: [1] [H POSITION] Adjusts the horizontal position of the user box.
Page 44 Chapter 4 Menu Operations — Menu list (AK-SHU800) [MONITOR DISPLAY] Item Description of settings [F NUMBER] Shows/hides the iris display (F value). [OFF], [ON] f Factory setting: [OFF] This is displayed when you use a lens that outputs position information. [ZOOM] The zoom position display is hidden.
Page 45: [Switch Mode]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [SWITCH MODE] [USER SWITCH] Item Description of settings [USER SWITCH1] Selects the function of the <USER 1> button. [INH], [MODE CHECK], [BARS] f Factory setting: [INH] [USER SWITCH2] Selects the function of the <USER 2> button. [INH], [MODE CHECK], [LOCK], [BARS] f Factory setting: [INH] f Pressing of the <MENU>...
Page 46 Chapter 4 Menu Operations — Menu list (AK-SHU800) [IRIS] Item Description of settings [IRIS OFFSET SW] Enables/disables the compensation against the iris control value. [OFF], [ON] f Factory setting: [OFF] [IRIS OFFSET] Compensates the iris control value from the camera. [−100]…[+100] f Factory setting: [0] [W/B BAL SETTING]...
Page 47 Chapter 4 Menu Operations — Menu list (AK-SHU800) [TALLY] Item Description of settings [FRONT TALLY] Sets enable/disable and brightness of the front tally lamp. [OFF], [LOW], [HIGH] f Factory setting: [LOW] [BACK TALLY] Sets enable/disable and brightness of the back tally lamp. [OFF], [LOW], [HIGH] f Factory setting: [HIGH] [BAR SETTING]...
Page 48: [Paint (Main)]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [PAINT (MAIN)] Adjust the <SDI OUT 1> to <SDI OUT 4> images. When pixels are set to either 1080, the images output from <HD SDI1> and <HD SDI2> are also configured. [PAINT SWITCH] Item Description of settings [WHITE SHADING]...
Page 49 Chapter 4 Menu Operations — Menu list (AK-SHU800) [CHROMA] Item Description of settings [CHROMA LEVEL SWITCH] Enables/disables the gain adjustment of chroma. [OFF], [ON] f Factory setting: [OFF] [CHROMA LEVEL] Sets the gain adjustment of chroma. [−100%]…[+40%] f Factory setting: [0%] [COLOR TEMP SETTING] Item Description of settings...
Page 50 Chapter 4 Menu Operations — Menu list (AK-SHU800) [WHITE SHADING] Item Description of settings [CORRECT] Enables/disables the white shading (saw-toothed waveform or parabolic waveform) correction. [OFF], [ON] f Factory setting: [ON] [H SAW R] Adjusts the white shading gain for Rch horizontally using a saw-toothed waveform. [−100]…[+100] f Factory setting: [0] [H SAW G]...
Page 51 Chapter 4 Menu Operations — Menu list (AK-SHU800) [GAMMA/BLACK GAMMA] Item Description of settings [GAMMA] Enables/disables gamma correction. [OFF], [ON] f Factory setting: [ON] [MASTER GAMMA] Adjusts the gamma characteristic. [0.150]…[0.750] (0.0020 step) f Factory setting: [0.450] [R GAMMA] Adjusts the gamma characteristic of red to the master gamma. [−75]…[+75] f Factory setting: [0] [B GAMMA]...
Page 52 Chapter 4 Menu Operations — Menu list (AK-SHU800) [WHITE CLIP] Item Description of settings [WHITE CLIP] Enables/disables the white clip function. [OFF], [ON] f Factory setting: [ON] [MASTER WHITE CLIP LEVEL] Sets the white clip level. [80%]…[109%] f Factory setting: [109%] [R WHITE CLIP LEVEL] Adjusts red to [MASTER WHITE CLIP LEVEL].
Page 53 Chapter 4 Menu Operations — Menu list (AK-SHU800) [SKIN DTL SETTING] Item Description of settings [SKIN TONE DETAIL] Enables/disables the skin tone detail function. [OFF], [ON] f Factory setting: [OFF] [SKIN GET] — Selects whether to automatically obtain the color saturation and hue information from the cursor position. [NO], [YES] Selects the skin tone table of the subject to apply the skin tone table to.
Page 54 Chapter 4 Menu Operations — Menu list (AK-SHU800) [LINEAR MATRIX] Item Description of settings [MATRIX] Enables/disables the matrix. [OFF], [ON] f Factory setting: [OFF] [LINEAR MATRIX] — Enables/disables the linear matrix. [OFF], [ON] f Factory setting: [OFF] [LINEAR TABLE] Selects the table for linear matrix. [A], [B] f Factory setting: [A] [COLOR CORRECT]...
Page 55 Chapter 4 Menu Operations — Menu list (AK-SHU800) [COLOR CORRECTION] Item Description of settings [MATRIX] Enables/disables the matrix. [OFF], [ON] f Factory setting: [OFF] [LINEAR MATRIX] — Enables/disables the linear matrix. [OFF], [ON] f Factory setting: [OFF] [LINEAR TABLE] Selects the table for linear matrix. [A], [B] f Factory setting: [A] [COLOR CORRECT]...
Page 56 Chapter 4 Menu Operations — Menu list (AK-SHU800) Item Description of settings [CY PHASE] Adjusts cyan hue. [−127]…[+127] f Factory setting: [0] [B-CY PHASE] Adjusts the hue between cyan and blue. [−127]…[+127] f Factory setting: [0] [B PHASE] Adjusts blue hue. [−127]…[+127] f Factory setting: [0] [MG-B PHASE]...
Page 57: [Paint (Dc-Hd)]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [HLG SETTING] Item Description of settings [BLACK GAMMA SW] — Enables/disables black gamma. [OFF], [ON] f Factory setting: [OFF] [MASTER BLACK Adjusts the gamma characteristic adjacent to black. GAMMA] [−32]…[+32] f Factory setting: [0] [R BLACK GAMMA] Adjusts the gamma characteristic of red adjacent to black to the master gamma.
Page 58 Chapter 4 Menu Operations — Menu list (AK-SHU800) [PEDESTAL] Item Description of settings [MASTER PEDESTAL] Adjusts the black level of the master pedestal. [−299]…[+299] f Factory setting: [0] [R PEDESTAL] Sets the correction level of red to the master pedestal. [−800]…[+800] f Factory setting: [0] [G PEDESTAL]...
Page 59 Chapter 4 Menu Operations — Menu list (AK-SHU800) [GAMMA/BLACK GAMMA] Item Description of settings [GAMMA] Enables/disables gamma correction. [OFF], [ON] f Factory setting: [ON] [MASTER GAMMA] Adjusts the gamma characteristic. [0.150]…[0.750] (0.0020 step) f Factory setting: [0.450] [R GAMMA] Adjusts the gamma characteristic of red to the master gamma. [−75]…[+75] f Factory setting: [0] [B GAMMA]...
Page 60 Chapter 4 Menu Operations — Menu list (AK-SHU800) [WHITE CLIP] Item Description of settings [WHITE CLIP] Enables/disables the white clip function. [OFF], [ON] f Factory setting: [ON] [MASTER WHITE CLIP LEVEL] Sets the white clip level. [80%]…[109%] f Factory setting: [109%] [R WHITE CLIP LEVEL] Adjusts red to [MASTER WHITE CLIP LEVEL].
Page 61 Chapter 4 Menu Operations — Menu list (AK-SHU800) [SKIN DTL SETTING] Item Description of settings [SKIN TONE DTL] Enables/disables the skin tone detail function. [OFF], [ON] f Factory setting: [OFF] [ZEBRA] [ZEBRA] Enables/disables the zebra display. [OFF], [ON] f Factory setting: [OFF] [ZEBRA EFFECT Selects the table of the zebra display.
Page 62 Chapter 4 Menu Operations — Menu list (AK-SHU800) [LINEAR MATRIX] Item Description of settings [MATRIX] Enables/disables the matrix (linear matrix/12-axis color correction). [OFF], [ON] f Factory setting: [OFF] [LINEAR MATRIX] — Enables/disables the linear matrix. [OFF], [ON] f Factory setting: [OFF] [LINEAR TABLE] Selects the table for linear matrix [A], [B]...
Page 63 Chapter 4 Menu Operations — Menu list (AK-SHU800) [COLOR CORRECTION] Item Description of settings [MATRIX] Enables/disables the matrix (linear matrix/12-axis color correction). [OFF], [ON] f Factory setting: [OFF] [LINEAR MATRIX] — Enables/disables the linear matrix. [OFF], [ON] f Factory setting: [OFF] [LINEAR TABLE] Selects the table for linear matrix.
Page 64 Chapter 4 Menu Operations — Menu list (AK-SHU800) Item Description of settings [B-CY PHASE] Adjusts the hue between cyan and blue. [−127]…[+127] f Factory setting: [0] [B PHASE] Adjusts blue hue. [−127]…[+127] f Factory setting: [0] [MG-B PHASE] Adjusts the hue between blue and magenta. [−127]…[+127] f Factory setting: [0] [MG PHASE]...
Page 65: [Paint (Crop)]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [HLG SETTING] Item Description of settings [BLACK GAMMA SW] — Enables/disables black gamma. [OFF], [ON] f Factory setting: [OFF] [MASTER BLACK Adjusts the gamma characteristic adjacent to black. GAMMA] [−32]…[+32] f Factory setting: [0] [R BLACK GAMMA] Adjusts the gamma characteristic of red adjacent to black to the master gamma.
Page 66 Chapter 4 Menu Operations — Menu list (AK-SHU800) [CROP-3] Item Description of settings [GAIN] Sets the gain up volume for the signal output from the <SDI OUT 3> terminal. [−3dB]…[3dB] (1dB step) f Factory setting: [0dB] [CHROMA] [CHROMA LEVEL Enables/disables the gain adjustment of chroma included in the signal output from the <SDI OUT 3> SWITCH] terminal.
Page 67: [System Mode]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [SYSTEM MODE] Item Description of settings FREQUENCY Sets the system frequency. [59.94], [50] f Factory setting: [59.94] (AK-SHU800PS), [50] (AK-SHU800E) [PIXEL] Sets the number of pixels (resolution). [4320], [2160], [1080] f Factory setting: [4320] (MAIN) Switches the HDR/SDR for the signal output from the <SDI OUT 1>...
Page 68: [In/Out Select]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [IN/OUT SELECT] Item Description of settings [HD-SDI 3G SDI] Sets the output format from the <SDI OUT 1> to <SDI OUT 4> terminals when [PIXEL] is [1080] and output format from the <HD SDI OUT 1> terminal when ［HD SDI1 OUT FMT］ is ［1080/59.94p］ or ［1080/50p］ . [LEVEL-A], [LEVEL-B] f Factory setting: [LEVEL-A] [HD SDI1 OUT FMT]...
Page 69: [Network Setup]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [NETWORK SETUP] [NETWORK SETUP] cannot be selected immediately after turning on the power or after switching [FREQUENCY] between 59.94 and 50 because the unit is starting up. This is not an error. Perform operation after a while. Item Description of settings Sets the IP address.
Page 70 Chapter 4 Menu Operations — Menu list (AK-SHU800) [SCENE FILE] Item Description of settings [MODE] Selects the operation mode. [LOAD], [STORE] f Factory setting: [LOAD] [FILE NO.] Selects a file. When [MODE] is set to [LOAD]: [OFF], [1]…[8] f Factory setting: [1] When [MODE] is set to [STORE]: [1]…[8] f Factory setting: [1]...
Page 71: [Maintenance]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [MAINTENANCE] [LENS FILE ADJUST] Item Description of settings [LENS FILE SW] Switches the enable/disable of the lens file. [OFF], [ON] f Factory setting: [OFF] [LENS FILE MODE] Selects the operation mode. [LOAD], [STORE], [CANCEL] f Factory setting: [LOAD] [FILE NO.] Selects a file.
Page 72 Chapter 4 Menu Operations — Menu list (AK-SHU800) Item Description of settings [W V SAW G] Adjusts Gch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform. [−100]…[+100] f Factory setting: [0] [W V SAW B] Adjusts Bch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform.
Page 73 Chapter 4 Menu Operations — Menu list (AK-SHU800) [DATE/TIME] Item Description of settings [PRESENT] Displays the present date and time. [DATE YY] Sets the year. [18]…[99] f Factory setting: [19] [DATE MM] Sets the month. [01]…[12] f Factory setting: [01] [DATE DD] Sets the day.
Page 74: [Diagnostic]
Chapter 4 Menu Operations — Menu list (AK-SHU800) [DIAGNOSTIC] [VERSION] Item Description of settings [SYSTEM] [CAM] Displays the overall software version of the camera head. “0.00-00-0.00” is displayed when a camera head is not connected. [IPU] Displays the overall version of the IPU. [SCVO FPGA] Displays the version of SCVO FPGA [DCMP FPGA]...
Page 75: Chapter 5 Connecting To External Devices
Connecting to External Devices Chapter 5 This chapter describes the external devices that can be connected to this unit.
Page 76: Connecting The Remote Operation Panel (Ak-Hrp1000)
Chapter 5 Connecting to External Devices — Connecting the remote operation panel (AK-HRP1000) Connecting the remote operation panel (AK-HRP1000) f Some of the functions can be controlled remotely by connecting the remote operation panel AK-HRP1000 (optional). NOTE t The software on the remote operation panel needs to be changed to be specifically for AK-SHB800 and AK-SHU800. For details, contact your dealer. t A remote operation panel that has had its software changed to be specifically for AK-SHB800 and AK-SHU800 cannot be connected to or operate other than 8K devices.
Page 77: Chapter 6 Network Settings
Network Settings Chapter 6 This chapter describes how to configure the settings from a computer.
Page 78: Setting The User Account
Setting the user account Software To install the software, download User Account Setup Software (AccoutGen) from the following website. (Windows) https://pro-av.panasonic.net/ r User Account Setup Software (AccoutGen) User account setting of this unit can be set using User Account Setup Software.
Page 79: Chapter 7 Maintenance
Maintenance Chapter 7 This chapter describes the warning displays and after-sales services of the camera and IPU.
Page 80: Troubleshooting
Chapter 7 Maintenance — Troubleshooting Troubleshooting For operations Problem Cause/solution The camera cannot be turned on. Does the power cable plugged into the power outlet securely? Operation from the IP connected remote camera Is the power turned on? controller is not possible. f Confirm that the <DC IN>...
Page 81: Recharging The Internal Battery
Chapter 7 Maintenance — Recharging the internal battery Recharging the internal battery The internal battery maintains the date and time set in the IPU. If the IPU is left for about 6 months without turning the power on, the internal battery may be depleted. The internal battery is depleted if ［BACKUP BATT EMPTY］...
Page 82: Checking The Operating Time
Chapter 7 Maintenance — Checking the operating time Checking the operating time The operating time can be checked in [MAIN MENU] → [DIAGNOSTIC] → [HOUR METER]. [OPERATION]: Displays the total time of this unit powered up. [FAN]: Displays the run time of the fan. –...
Page 83: Warning Displays
Chapter 7 Maintenance — Warning displays Warning displays The following warnings are displayed if problems are detected during operation. Camera warning displays r When AWB (automatic white balance) is executed [AWB HIGH LIGHT NG] Automatic white balance cannot be executed because the light amount is excessive. Set the light amount to an appropriate level.
Page 84: Updating The Camera Firmware
Chapter 7 Maintenance — Updating the camera firmware Updating the camera firmware Refer to the following website for new updates of the firmware and for operating instructions. https://pro-av.panasonic.net/ – 84 –...
Page 85: Chapter 8 Specifications
Specifications Chapter 8 This chapter describes the specifications of this product.
Page 86: Specifications
Chapter 8 Specifications — Specifications Specifications 8K Multi Purpose Camera AK-SHB800 Power 12 V Power consumption 33 W indicates safety information. Ambient operating temperature −10 °C to 45 °C (14 °F to 113 °F) (Preheating required under a temperature 0 °C (32 °F) or below) Storage temperature −20 °C to 60 °C (−4 °F to 140 °F) Ambient operating humidity...
Page 87: Image Processing Unit Ak-Shu800
Chapter 8 Specifications — Specifications Image Processing Unit AK-SHU800 Power AC ( ) 100 V to 240 V, 50 Hz/60 Hz Power consumption 250 W indicates safety information. Ambient operating temperature 0 °C to 40 °C (32°F to 104°F) Storage temperature −20 °C to 60 °C (−4°F to 140°F) Ambient operating humidity 10% to 90% (With no condensation)
Page 88: Details Of The Connector Signals
Chapter 8 Specifications — Details of the connector signals Details of the connector signals 8K Multi Purpose Camera AK-SHB800 DC IN UNREG GND Not used Not used +12 V HA16RA-4P(77) (Hirose Electric Co.) NOTE t Use the external power supply with correct polarity. TRUNK TRUNK1_RX (H) TRUNK1_TX (H)
Page 89: Image Processing Unit Ak-Shu800
Chapter 8 Specifications — Details of the connector signals Image Processing Unit AK-SHU800 ROP_CONT (H) ROP_CONT (C) ROP_DATA (H) ROP_DATA (C) Not used Not used Not used Not used +12 V HR10G-10R-10SC (71) (Hirose Electric Co.) Not used Not used Not used Not used Not used...
Page 90 Chapter 8 Specifications — Details of the connector signals COMMUNICATION Not used Not used Not used Not used Not used Not used Not used Not used Not used R_TALLY_IN_H R_TALLY_IN_C (GND) Not used Not used Not used Not used Not used Not used Not used Not used...
Page 91: Index
Index Index Black balance adjustment Warning displays Black control function White balance adjustment White clip function Center marker Chroma setting function Zebra pattern Color bar Color correction function Connector signals Detail function [DIAGNOSTIC] [DISPLAY SETUP] Environment for computer [FILE] Focus assist function Gamma function Genlock adjustment High color function...

This manual is also suitable for:

Ak-shb800ps Ak-shu800ps Ak-shu800e

Panasonic AK-SHB800G Operating Manual

Chapter 1 Overview

Before Using the Camera

Notes

Using the Camera in a System

Accessories

Chapter 2 Description of Parts

8K Multi Purpose Camera AK-SHB800

Image Processing Unit AK-SHU800

Chapter 3 Operation

On-Screen Displays of the Monitor

Data

Operation Procedure

Adjustment for Shooting

Image Quality Adjustment

Multi-Formats

Convenient Shooting Functions

Chapter 4 Menu Operations

Menu Operations (AK-SHU800)

Menu Configuration (AK-SHU800)

Menu List (AK-SHU800)

Chapter 5 Connecting to External Devices

Connecting the Remote Operation Panel (AK-HRP1000)

Chapter 6 Network Settings

Setting the User Account

Chapter 7 Maintenance

Troubleshooting

Recharging the Internal Battery

Checking the Operating Time

Warning Displays

Updating the Camera Firmware

Chapter 8 Specifications

Details of the Connector Signals

Index

Quick Links

Related Manuals for Panasonic AK-SHB800G

Summary of Contents for Panasonic AK-SHB800G

This manual is also suitable for:

Table of Contents