Table Of Contents; Introduction - ABB MagMaster Configuration Manual

CONTENTS
1 introduction ................................................................... 1
2 Configuring the transmitter ......................................... 2
2.1 Getting Started .................................................... 2
2.2 Looking at the Main Menu .................................. 3
2.3 Choosing a Main Menu Item ............................... 3
2.4 The Main Menu ................................................... 5
2.5 Password Access ................................................ 5
2.5.1 Gaining access to the user level .......... 5
2.5.2 Gaining Access to the Engineer Level . 6
2.6 Changing the Value of a Parameter ................... 6
2.6.1 Numerical Value Parameters ............... 6
2.6.2 Logic ('1' or '0') Value Parameters .........
(excluding Alarm Parameters) .......................... 7
2.6.3 Alarm Parameters ................................ 8
2.7 Advanced Techniques ......................................... 8
2.7.2 Fast Selection plus Data Entry ............. 8
3 Fault Finding ................................................................ 9
3.1 Alarms ............................................................ 9
3.2 Test Mode ........................................................... 9
APPENDIX A ...................................................................... 11
A1.1 Programming The Transmitter with a Data ........
Terminal .......................................................... 11
A1.2 Using Personal Computers with MagMaster . 11
A1.2.1 PC Tools ........................................... 12
A1.2.2 Windows 'TERMINAL' ...................... 12
A1.2.3 Odyssey and Procomm Plus ............ 12
A1.2.4 'VBC' and 'Aquamag' ....................... 12
A1.3 Quick Set-up for Psion Series 3 ..................... 12
A1.4 Setup for Psion Organiser II (CM, XP, LZ, ........
LZ64) .......................................................... 14
A1.4.1 Keyboard Designations (Psion Organiser II)14
APPENDIX B ...................................................................... 15
B1.1 Parameter Tree Structure ............................... 15
B1.2 Description of Parameters .............................. 17
Trademarks: All Trademarks used in this manual are
gratefully acknowledged.
SAFETY MEASURES
Warning.
• EXPLOSION HAZARD.
SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2.
• EXPLOSION HAZARD.
DO NOT REMOVE FUSE OR DISCONNECT POWER LEADS WHILE CIRCUIT IS LIVE.
• THE LOCAL TERMINAL MUST NOT BE USED WHEN THERE IS AN EXPLOSION RISK.

1 INTRODUCTION

The Magmaster transmitter, when connected to ABB
electromagnetic full bore and insertion type sensore, provides
high pecision measurement of electrically conductive fluids.
The ransmitter can be fitted either integrally to full bore
sensors or remotely to insertion and full bore sensors.
This manual provides details to enable the transmitter to be
reconfigured from default parameters or from parameters
initially set up by the factory to special order.
1.1 Filing Cabinet Analogy
1
Read
2
Disp
3
Login
Filing Cabinet Analogy
The main menu is accessed similarly to opening the drawers
of a filing cabinet, each drawer of the cabinet representing an
item of the main menu.
Main Menu items 1 to 3 are generally accessible; the
remainder are password protected.
Files in the drawers of the cabinet would represent the groups
of parameters provided by the transmitter which, if required,
may be viewed or changed as shown in this, and the following
pages.
1