A1.4 Setup For Psion Organiser; Lz64); A1.4.1 Keyboard Designations (Psion Organiser Ii)14 - ABB MagMaster Configuration Manual

...APPENDIX A
A1.4 Setup for Psion Organiser II (CM, XP, LZ, LZ64)
Note. It is recommended that the mains adapter is used to power the 'Organiser' where possible.
1. Connect the Psion Organiser Communications Link Adapter to the MagMaster Transmitter using a suitable adapter lead
consisting of a 25-pin D-Type plug to 9-pin D-Type socket (available as a Psion accessory).
2. Scroll through the following list of items which will be shown on the 'screen' in the Comms '
BAUD
PARITY
BITS
STOP
HAND
PROTOCOL
ECHO
WIDTH
TIMEOUT
REOL
REOF
RTRN
TEOL
TEOF
TTRN
Enter the following numbers to give the operations shown in the above:
13,10
13
Select ' ' from the 'Comms' menu to allow communication with the MagMaster Transmitter.
TERM
Set to 'No Handshaking', 'No translations'.
COMMS
Set the MagMaster Display Mode (Parameter '21') to '1'. (Refer to
A1.4.1 Keyboard Designations (Psion Organiser II)
Note. The and
Organiser handbook for further information.
14
4800
NONE
8
1
NONE
NONE
HOST
NONE
NONE
<CR><LF>
NONE
NONE
<CR>
NONE
NONE
<CR><LF>
<CR>
Function
DEL
ESC
keys cannot be used, as these enable and disable the Organiser data output. Consult the Psion
3.6 Changing the Value of a Parameter
Key
EXE
DEL
A
+
' mode.
SETUP
in this manual).