ABB MagMaster Configuration Manual page 22

APPENDIX B...
...B1.2 Description of Parameters
Main Menu
Tot 7>
20
Sub-menus
7
Tot Unit 1 >
Tot Mult 2 >
Enter '1' (CR) to enable totaliser reset function to be used from terminal or
Tot ClrEnab 3 >
transmitter display.
Enter Q (CR) to return to Main Menu or (CR) to cycle around this menu.
Tot Quit
Q >
1 Select totaliser measurement units
Enter a '1' in ONE parameter
ONLY to select required units:
Litres
Tot Unit Ltr 1> 1
Cubic metres
Tot Unit m^3 2> 0
Imperial gallons
Tot Unit lgal 3> 0
U.S. gallons
Tot Unit Ugal 4> 0
Cubic feet
Tot Unit Cuft 5> 0
Enter Q (CR) to return to Flow Menu or (CR) to
Tot Unit Quit Q>
cycle around this menu.
Select multiplier units required.
2
Enter a '1' in ONE parameter
ONLY to select required units:
Milli (0.001)
Tot Mult m 1> 0
Centi (0.01)
Tot Mult c 2> 0
Unity (1)
Tot Mult 3> 1
Hundreds (100)
Tot Mult h 4> 0
Thousands (1000)
Tot Mult k 5> 0
Millions (1000000)
Tot Mult M 6> 0
Enter Q (CR) to return to Tot Menu or (CR) to
Tot Mult Quit Q>
cycle around this menu.
Remarks