Table of Contents
Advertisement
... the oven lamp needs to be replaced
Z
Caution: danger of electric shock! Discon-
nect the oven from the mains before you open
the oven lamp cover. Switch off the fuse or pull
out the mains plug!
Z
Allow the appliance and the lamp to cool before
changing the lamp. If the oven has been used
recently, the lamp will be hot!
You can replace defective light bulbs yourself.
Type: 25 W, 230/240 V, socket: E14
Important: bulbs must be heat-resistant
up to 300 °C!
You can obtain these lamps from the customer service
centre or from your dealer.
Changing the light bulb:
•
Unscrew the shelf racks.
•
Carefully lever out the glass cover with a screw-
driver.
•
Unscrew the defect bulb, remove it and screw in
the new one.
•
Replace the glass covering.
... the door seal has to be replaced
Z
Do not use the oven if the door seal is damaged
or missing!
If the seal is damaged, or if it can no longer be
cleaned, it must be replaced. You can obtain a new
sealing from customer service.
Unhooking the seal
•
To remove the seal, start by carefully unhooking
it at each corner.
Fitting a new seal
•
Insert the new seal one corner at a time into the
oven front.
Take care not to bend the hooks out of shape!
•
Hook the seal in at the top and the bottom too.
31
Advertisement
Table of Contents
