Adjusting the minute minder
The minute minder can be used independently of
the switching functions.
Press " Q ". The lamp will flash. The display will
•
read "0.00".
•
Use "+"/"-" to set the timer in minutes and sec-
onds.
Start the minute minder with " Q " or wait until
•
the lamp stops flashing. You will see in the dis-
play the time remaining until the buzzer sounds.
•
An acoustic signal is generated when the alarm
time has elapsed.
•
Press any button to stop the buzzer. The dis-
play will show the normal clock again.
0
000
053 0
11
888
888