Oven Lamp And Lamp Socket Removal; Positive Lock® Connector; (No-Case Type) Removal - Electrolux EI27MO45GSA Technical & Service Manual

Component Teardown
Oven Lamp and Lamp Socket
Removal
1. Disconnect oven from power supply and remove
outer case.
2. Open the door and block it open.
3. Discharge high voltage capacitor.
To discharge the high voltage capacitor, wait for 60
seconds and then short-circuit the connection of
the high-voltage capacitor (that is the connecting
lead of the high-voltage rectifier) against the
chassis with the use of an insulated screwdriver.
4. Pull the wire leads from the oven lamp socket.
5. Remove support bracket and the magnetron duct.
6. Unscrew the oven lamp from the lamp socket.
7. Remove socket from magnetron duct.
8. Now, the oven lamp and socket are free.
Terminals
Magnetron Duct
Oven Lamp
Figure 4-2. Oven Lamp Socket
Socket
®
Positive Lock
Type) Removal
1. Disconnect oven from power supply and remove
outer case.
2. Open the door and block it open.
3. Discharge high voltage capacitor.
To discharge the high voltage capacitor, wait for 60
seconds and then short-circuit the connection of
the high-voltage capacitor (that is the connecting
lead of the high-voltage rectifier) against the
chassis with the use of an insulated screwdriver.
4. Push the lever of positive lock
5. Pull down on the positive lock
When connecting the positive lock
the terminals, connect the positive lock
the lever faces you.
Positive lock
connector
Lever
Positive Lock®, Connector
Figure 4-3. Positive Lock
4-4
Connector (No-Case
® connector.
®
connector.
®
connectors to
®
so that
Terminal
1
Push
2
Pull down
®
Connector