LINER PLACEMENT
Only the liner set that has been certified with this unit shall
be used.
STEP 1
STEP 1
STEP 2 & 3
NOTE: When properly installed the side panel is designed
to hold the top panel in place.
STEP 2
STEP 4
STEP 4
© 2021 Breckwell Hearth
LOG PLACEMENT
If converting to LP (propane) gas, complete the conversion
before installing the log set. Follow the conversion
instructions included with the kit.
Only the log set that has been certified with this unit shall
be used. NOTE: This unit should not be burned without the
approved logs, surrounds, and liners properly installed. Use
without the logs, surrounds, and liners properly installed
could cause damage to the appliance.
STEP 1
STEP 3
STEP 2
28
STOVE INSTALLATION
CAUTION:
DO NOT PLACE LOGS DIRECTLY OVER BURNER PORT
HOLES. IMPROPER LOG PLACEMENT MAY AFFECT FLAME
APPEARANCE AND CAUSE EXCESSIVE SOOT TO BUILD
UPON THE LOGS AND GLASS.