Temporary Needle Bar Setting - Brother PR-620 Operation Manual

EMBROIDERING SETTINGS ——————————————————————————————————————————————

Temporary Needle Bar Setting

After embroidering begins, the machine can be stopped at a color change and a different needle bar can be
specified for the next color to be sewn.
By substituting upper thread already threaded on a different needle bar, the time for sewing can be saved. For
example, similar color thread can be substituted for temporary use.
1 While sewing the color before the one that
you wish to change, touch
changes to .
After the color currently being sewn is
finished, the threads are trimmed and the
machine stops.
• The start/stop button can be pressed at the
color change to stop the machine, but, in
that case, stop the machine after the threads
are trimmed.
2 Touch .
The temporary needle bar setting screen
appears.
94
3 Touch the key for the needle bar threaded
with the thread that you wish to embroider
so that it
with.
4 Touch
5
Touch
button to begin embroidering.
.
The embroidering screen appears again.
, and then press the start/stop
Embroidering continues with the specified
needle bar.