Understanding The Screens - Brother PR-620 Operation Manual

Understanding the screens

When the machine is turned on and
operations described below will be entered using the operation panel. For precautions concerning the use of the
touch panel, refer to page 16.
The screen that appears the next time that the embroidery machine is turned on differs depending on how the
machine was previously turned off. (Refer to page 62.)
No. Display Key Name
1 Settings key
Machine
2 operations guide
key
New embroidery
3
key
4
Help key
Pattern display
5
area
*The keys in the table above appear and can be used in most of the screens described later in this manual. The
settings key cannot be used in the embroidering settings screen.
is touched, the pattern type selection screen appears. The
Touch this key to change the embroidery machine settings.
Touch this key to check a machine operation.
Cancels all operations previously performed and returns to
the initial pattern group selection screen.
When a problem occurs, for example, there is an operating
procedure that you do not know, touch this key to view
solutions.
This area displays the selected pattern. The line 6 shows the
embroidering area for the extra-large embroidery frame. The
embroidery frame indications, the grid lines and other
display settings can be specified from the machine settings
screen.
Function
Turning ON the Machine 21
2
1
2
Reference
3
Page
p. 140 4
5
p.151
6
7
p. 153
8
9
p. 143
10
11
12
13
14