Temporary Needle Bar Setting - Brother PR650e Operation Manual

EMBROIDERING SETTINGS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Temporary Needle Bar Setting

After embroidering begins, the machine can be stopped at a color change and a different needle bar can be
specified for the next color to be sewn.
By substituting upper thread already threaded on a different needle bar, the time for sewing can be saved.
For example, similar color thread can be substituted for temporary use.
1 While sewing the color before the one that
you wish to change, touch
changes to .
After the color currently being sewn is
finished, the threads are trimmed and the
machine stops.
• The start/stop button can be pressed at the
color change to stop the machine, but, in
that case, stop the machine after the
threads are trimmed.
2 Touch .
The temporary needle bar setting screen
appears.
130
3 Touch the key for the needle bar threaded
with the thread that you wish to embroider
so that it
with.
4 Touch
The embroidering screen appears again.
5 Touch
stop button to begin embroidering.
1
1 Only the needle bar number changes to
indicate the selected needle bar.
Embroidering continues with the specified
needle bar.
.
, and then press the start/