STEP:13
CENTER COVER & BOTTLE HOLDER ASSY
As photo shown
1) Pull down the knob of adjustor to the lowest position, leave enough space
to install the center cover & bottle holder.
2)locking bottle holder(#127) and rear cover (#125) with four screws (#128)
for round of upright tube and or two screws (#30) for square of
upright tube ( T100)
2) Secure the bottle holder and fron cover (#126) to the center of upright
tube and locking with four screws (#122)
STEP:14
As photo shown
1) Fit the fixed handlebar (#71) with the screws (#6) and thru the bracket hold
of upright tube with M10 Allen Key,
2) Set both EKG grip cables thru the small holes under the fix handlebar (#71)
on the upright tube.
3) Pick up the cables from top of the upright tube.
4) Secure the fix handlebar covers with screw ( #61)
Note! the cover with a nut inside of post is the bottom cover (#97)‐ for
and the bottom cover (#134)‐IS FOR T100
ROUND TUBE
STEP:15
As photo shown
1) connect cables comes out from console (#43) & cables from the upright
tube together.
Note! Check & plug cables, same color to be plug together.
Black color can plug in with any black , no need to select
special plug.
Make sure all plug firmly in then insert all plugged cables
to top of upright tube.
2) set console to the top plate on the upright tube and secure both with
screws (E)
STEP:16
As photo shown
1) The distinction between left and right pedal .
Note! the pedal has left/right label
2) Locat the front of pedal, set four screws(#18) to the pedal (#53) & steel
plate on the second pedal support tube (#103).
Note! pedals side edges inside
3) Move the pedal, the holes aligned, secure the screws (#18) with M10
Allen key.
JOYSPORT
www.joysport.nl
FIXED HANDLEBAR ASSY
CONSOLE ASSEMBLY
PEDAL ASSY.
NO
#122
#128
#30
NOTE: #30 IS FOR THE
SQUARE UPRIGHT TUBE
NO
#6
#61
#97
#134
SQUARE TUBE
NO
E
NO
#18
PARTS LIST QUANTITY
4
4
2
PARTS LIST
QUANTITY
2
1
1
1
PARTS LIST QUANTITY
4
PARTS LIST QUANTITY
8
15