Heart Rate Function; Safety Function; Power Save Function - Energetics PR 2.9 ELITE Computer Manual

Table of Contents

Available languages

HEART RATE FUNCTION

Place your palms on the hand pulse and the pulse will be shown in the pulse window after 5 seconds. The heart rate is

for reference only and not for medical purpose.

If at any stage you require the treadmill to stop, pull the safety cord from the treadmill and it will cut power to the

unit immediately. The window will display "- - -" and the buzzer will make a 3 times "beep" sound. Attach the safety key

again and you can adjust the weight which is displayed in the window.

Without any operation for ten minutes the unit will begin to hibernate, and the display will dim. Press any button to

wake up the display.

CAUTION

1. We recommend that you maintain a slow speed at the beginning of a session and hold on to the handrails until you

become comfortable and familiar with the treadmill.

2. Attach the magnet end of the safety pulling rope to the computer and also attach the clip of the safety pulling rope

to your clothing.

3. To end your workout safely, press the STOP button or pull out the safety cord, then the treadmill will stop

immediately.

Table of Contents