Configuring Mfp For One-Way (Http) Communication - Konica Minolta bizhub C35 Setup Instructions

14. Enter correct time zone by pressing the - or + keys and then press OK to save the
changes. This setting will be required, even with NTP configured on the MFP.
a. Eastern Time Zone: -05:00
b. Central Time Zone: -06:00
c. Mountain Time Zone: -07:00
d. Pacific Time Zone: -08:00
15. Press Close to exit the Time settings.
16. Press [Daylight Savings Time] button -> Enable -> then OK.
17. Press Offset to verify setting is configured for 60 minutes and then press OK.
18. Press Close three times and then Home to exit Administrator mode.
D. Configuring MFP for One-Way (HTTP) Communication
1. Press Utility/Counter -> [Meter Count] -> STOP - > 00 -> STOP -> 01.
2. Press Password -> 92729272 -> OK twice to enter Service Mode.
3.
Press [Down Arrow] twice and then [CS Remote Care] button.
Konica Minolta bizhub C35
bizhub vCare HTTP Setup Guide
Page 3 of 21