Ordering Information - Measurement Computing P-Series Instruction Manual

Instruction Manual

4.2 Ordering information

Measurement Specialties offers single and dual axis inclinometers of the P-series in the three different
measurement ranges +/- 5°, +/- 15° and +/-45° with RS 232, voltage or current output signals.
PART NUMBERING UNIT
Single axis unit
G-NSP-001 NS-5/P
G-NSPI-001 NS-5/PI
G-NSP-002 NS-15/P
G-NSPI-002 NS-15/PI
G-NSP-005 NS-45/P
G-NSPI-006 NS-45/PI
Dual axis unit
G-NSP2-001 NS-5/P2
G-NSP2-003 NS-15/P2
G-NSP2-006 NS-45/P2
Accessories
G-NSMIS-005 certificate
G-NSMIS-001 connection
G-NSMIS-015 connection
G-NSMIS-002 connection
G-NSMIS-003 connection
Other cable lenght on request
MEAS Deutschland GmbH
Hauert 13, D-44227 Dortmund, Germany
P-Series Inclinometer
SHORT DESCRIPTION
single axis, +/-5° angle, Vcc +6.5...24VDC, output +/-1.5V,RS232
single axis, +/-5° angle, Vcc +6.5...24VDC, output 4...20mA,RS232
single axis, +/-15° angle, Vcc +6.5...24VDC, output +/-1.5V,RS232
single axis, +/-15° angle, Vcc +6.5...24VDC, output 4...20mA,RS232
single axis, +/-45° angle, Vcc +6.5...24VDC, output +/-1.5V,RS232
single axis, +/-45° angle, Vcc +6.5...24VDC, output 4...20mA,RS232
dual axis, +/-5° angle, Vcc +6.5...24VDC, output RS232
dual axis, +/-15° angle, Vcc +6.5...24VDC, output RS232
dual axis, +/-45° angle, Vcc +6.5...24VDC, output RS232
certificate of calibration, calibration protocol
connector,straight, Submin. 712-series
connector, angle 90°, Submin. 712-series
2 m cable, straight connector Submin. 702-series
2 m cable, angle 90° connector Submin .702-series
www.meas-spec.com
5 of 16
July 2014
phone: +49-(0)231-9740-0
fax: +49-(0)231-9740-20