Introduction; Notice; History - Measurement Computing P-Series Instruction Manual

Instruction Manual
1

Introduction

Thank you for purchase of a P-Series inclinometer from Measurement Specialties.
This manual offers information on the proper installation and operation.
2

Notice

Please observe all proper safety rules and regulations for electrical devices
when installing this inclinometer. In addition, the following recommendations are
made.
1. Do not apply power to the inclinometer during installation.
2. Avoid applying any mechanical pressure or stress to the housing.
3. Do not operate an inclinometer beyond the maximum angular
sensing range or threshold. Irreparable damage may occur.
4. Do not exceed the maximum fastening torque for the mounting screws, as the
base plate may become warped and/or irreparably damaged.
5. Use detergents free of alcohol or acid for cleaning of the housing.
6. Avoid direct solar radiation.
7. Hand tightens mating connector. DO NOT use pliers as damage may occur.
8. Should the inclinometer fail to operate properly, consult this manual for
possible solution. Do not attempt to open the inclinometer, as damage may
occur. For other troubleshooting measures, please contact our customer service
team.
3

History

Version Date
1.0 05.Dec. 2011
1.1 20.Nov. 2013
1.2 13.May 2014
MEAS Deutschland GmbH
Hauert 13, D-44227 Dortmund, Germany
P-Series Inclinometer
Treatment
First Draft
Correction 5.6.1.1 graph
Update maximum ratings
www.meas-spec.com
3 of 16
July 2014
Author
M.Zürn
M.Zürn
M.Zürn
phone: +49-(0)231-9740-0
fax: +49-(0)231-9740-20