Configuring Video Tampering - Honeywell Performance Series User Manual

78 | Performance Series 5 MP Fisheye IP Camera User Guide
Parameter
Region
Sensitivity
Threshold
Delete All
Delete

Configuring Video Tampering

www.honeywell.com/security
Table 6-2 Motion Detection Area Configuration
Function
You can configure up to four regions with different motion detection
settings (sensitivity and threshold).
Adjust the brightness sensitivity. You might need to increase the
brightness sensitivity to trigger motion detection. You can configure a
different sensitivity for each of the four regions. The sensitivity ranges
from 0 to 100. We recommend that you choose a sensitivity between
30 to 70. The default is 50.
The threshold determines how much change in a scene is required to
trigger a motion detection alarm. The lower the threshold setting, the
easier it is to trigger an alarm. You can configure a different threshold
for each of the four regions. The sensitivity ranges from 0 to 100. We
recommend that you choose a sensitivity between 10 to 50.
Delete all motion detection areas.
Delete the selected motion detection region.
Figure 6-4 Tampering Configuration Interface