Bonjour - Honeywell Performance Series User Manual

56 | Performance Series 5 MP Fisheye IP Camera User Guide
Parameter
SNMP Version
SNMP Port
Read Community
Write Community
Trap Address
Trap Port
Authentication
Type
Authentication
Password
Encryption

Bonjour

Bonjour is based on the multicast DNS service from Apple. It can automatically broadcast its
service information and listen to the camera information from the other camera.
www.honeywell.com/security
Table 5-11 SNMP Configurations
Function
Select the check box for the SNMP version(s) that you want to use:
• SNMP v1: the device only processes v1 info (such as UDP, IP,
CLNS, DDP and IPX).
• SNMP v2: the device only processes v2 info (v1 info with improved
performance, security, and confidentiality).
• SNMP v3: to set a username, password and encryption method for
the SNMP communication.
The listening program of the proxy program of the device. The default
Port setting is 161. You can modify this setting as necessary, from 1 to
65535.
Read-only access to all SNMP targets. The default is public.
Note: only numbers, letters, _, and - are supported in this field.
Read/write access to all SNMP targets. The default is private.
Note: only numbers, letters, _, and - are supported in this field.
The destination address of the Trap information message from the proxy
program of the device.
The port which sends the Trap message (default is 162, range 1~65535).
Only available when SNMP v3 is selected.
You may select either MD5 or SHA authentication (MD5 is default).
Only available when SNMP v3 is selected.
You may enter a password not less than 8 characters.
Only available when SNMP v3 is selected. CBC-DES is the default
encryption. Enter a password not less than 8 characters.
Note SNMP v3 has a higher level of cyber security than SNMP v1 and v2. Honeywell
recommends that customers use SNMP v3.