Video Encoder Controls - Honeywell Performance Series User Manual

22 | Performance Series 5 MP Fisheye IP Camera User Guide
1
4

Video Encoder Controls

You can choose a stream and set the stream protocol with the video encoder controls.
Setting
Main Stream
Sub Stream 1/
Sub Stream 2
Protocol
www.honeywell.com/security
Figure 3-5 Live View Interface
1 Video encoder controls (see
2 System menus (see
3 Live View controls toolbar (see
4 Live View window settings toolbar (see
5 Fisheye Installation and Display Mode controls (see
Mode Configuration on page
Figure 3-6 Video Encoder Controls
Table 3-1 Video Encoder Controls
Video Encoder Controls, page
System Menus, page 23)
Live View Controls, page
Live View Window Configuration, page
24).
Description
In a normal network bandwidth environment, the main stream
can record audio/video files and support a network monitor.
Set the main stream resolution if your camera supports it.
If the network bandwidth is not sufficient, you can use the sub
stream with lower resolution to support a network monitor.
You can select the stream media protocol from the drop-down
list. There are three options: TCP, UDP, or Multicast.
22)
23)
Fisheye Installation and Display
2
3
5
23)