Snmp - Honeywell Performance Series User Manual

1.
2.
3.
4.

SNMP

SNMP is a popular protocol for network management that allows the communication between
the network management work station software (or enterprise switch with SNMP management)
and the proxy of the managed device (IP camera). Please install the software such as MG
MibBrowser 8.0c, MG-Soft MIB suite, iReasoning MIB Browser, or just about any MIB browser
that is in use today to establish the SNMP service before you use this function. You will need to
reboot the device to activate the new setup.

Go to Start Control Panel
Click Add or remove programs, and then select Network Services from the Windows
Components Wizard.
Click Details, and then click to select Internet Gateway Device Discovery and Control
client and UPnP User Interface.
Click OK to begin the installation.
Figure 5-17 SNMP Configuration Interface
Configuring Camera Settings | 55

Add or remove programs.
800-22756 - B - 04/2017