System Menus; Live View Controls; Live View Window Configuration - Honeywell Performance Series User Manual

System Menus

When you log in to the camera using the web client, the Live View interface opens by default.
To access the Playback, Setup, and Alarm interfaces, or to log out, select the corresponding tab
in the system menu.

Live View Controls

From the Live View controls toolbar, you can zoom in on a scene, take a snapshot, or manually
record video. These controls are described with detail in
Icon

Live View Window Configuration

From the Live View window configuration toolbar, you can adjust the screen brightness,
contrast, hue, or saturation; change the screen size and/or aspect ratio; and adjust image
fluency. These controls are described in more detail in
Figure 3-7 System Menu
Figure 3-8 Live View Window Controls
Table 3-2 Live View Window Controls
Control
Alarm Output
Digital Zoom
Snapshot
Triple Snap
Record
Audio Output Click to enable/disable audio when monitoring a scene.
Bidirectional
Talk
Help
Logging In and Viewing Live Video | 23
Table
Description
Shows the alarm output status. When red the alarm output is
active. Grey means there is no alarm. Click
turn the alarm output on or off.
While viewing live video, click
mouse button to zoom in on a specific area. Right-click the
mouse to return to the previous magnification.
Click to take a snapshot, saved as a JPEG at the default
location (\picture download).
To change the save path, see
  
Camera Video Path.
Click to take three snapshots at 1 fps. All images are saved to

the path as set in Setup
Click to start manual recording. All video is saved to Setup
 
Camera Video Path.
Click to enable/disable bidirectional talk to communicate with
someone within range of the camera.
Click to open Help.
Table
3-2.
to manually
and hold down the left
Path on page 61. Or go to Setup
 
Camera Video Path.
3-3.
800-22756 - B - 04/2017
