Garnet SeeLevel Special 808-P2 Important Operator Information page 22

6. If no further action is taken, the display will revert to normal operation
after about 5 seconds with no change in the float programming. This
is useful if you just want to check the current float programming.
7. To change the float programming, press and release the button before
the 5 second time expires, otherwise start again at step 3. Each time
the button is pressed the float type will change.
8. When the correct float type is shown, programming is complete. After
5 seconds of no button activity, the display will show "Stor" for 2
seconds if the float type has been changed, indicating that the new
float type has been stored.
9. The display will then return to normal operation.
Page 22 808-P2 Manual