Receiving I-Fax - Canon imageCLASS 2300 Basic Manual

Receiving I-Fax

If you set EMAIL RX PROTOCOL to SMTP on the MAIL USER SETTING menu, or
set EMAIL RX PROTOCOL to POP3 and specify an interval in the CHECK
INTERVAL menu, the machine will automatically receive mail. (See Chapter 3,
"Setting Up a Mail Account," in the Sending Guide.)
If you set EMAIL RX PROTOCOL to POP3 in the MAIL USER SETTING menu, you
can also receive mail manually. (See Chapter 3, "Setting Up a Mail Account," in the
Sending Guide.)
This section describes the procedure to manually receive mail.
1
7
2
3
TTI Selector
OK
7-8 Sendig and Receiving I-Fax
Press [FAX].
The fax indicator lights up, and the Fax Basic Features screen appears.
Press [Line/Mail] to display <I-FAX>.
The machine is ready to receive mail.
Open all three one-touch speed dialing panels © press [TTI
Selector] © highlight a sender name © press [OK].