Receiving A Fax - Canon MX450 series Online Manual

Receiving Faxes
This section describes the preparation necessary for receiving a fax and how to receive a fax.
Preparing for Receiving a Fax
Prepare for receiving a fax according to the following procedure.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the FAX button.
The Fax standby screen is displayed.
3. Make sure of the receive mode setting.
Make sure of the receive mode setting displayed on the Fax standby screen.
Note
For details on how to change the receive mode:
Setting the Receive Mode
4. Load paper.
Load the sheets of plain paper.
Loading Paper
5. Specify the paper settings as necessary.
Changing the Paper Settings
This completes the preparation for receiving fax.
When a fax is received, it is printed on the loaded paper automatically.

Receiving a Fax

Depending on the selected receive mode, the receive operation varies.
Note
For details on the receive mode:
Setting the Receive Mode
You can specify the advanced settings of each receive mode.
For details on the advanced settings of the receive mode:
Advanced Settings of Receive Mode
If the machine was not able to print a received fax, the machine stores the unprinted fax temporarily
in its memory (memory receiving).
Memory Reception
You can save received faxes on a USB flash drive as PDF files automatically when receiving a fax.
Saving Received Faxes Automatically on a USB Flash Drive
• When TEL priority mode is selected:
When the call is a fax: