Receiving Documents - Canon imageCLASS 2300 Basic Manual

Canon imageclass 2300: user guide
Hide thumbs Also See for imageCLASS 2300:
Table of Contents

Advertisement

Cause 4
Did you make a mistake in the subaddress or password registered for one-touch
or coded speed dialing?
Remedy
Check your one-touch or coded speed dialing settings.
Cause 5
Is the memory of the other fax machine full?
Remedy
Contact the other party and check.
You cannot send a document with a subaddress/password.
Cause 1
Does the other party's fax machine support ITU-T subaddress/password
transactions?
Remedy
Contact the other party and check.
Cause 2
Did you specify the other party's subaddress or password correctly?
Remedy
Check the other party's registered subaddress or password and specify the
same number.
Cause 3
Did you make a mistake in the subaddress or password registered for one-touch
or coded speed dialing?
Remedy
Check your one-touch or coded speed dialing settings.
Cause 4
Is the memory of the other party's machine full?
Remedy
Contact the other party and check.

Receiving Documents

Part of the documents you receive are cut off.
Cause 1
Are the slide guides in your stack bypass set to the size of the paper?
Remedy
Set the guides in the stack bypass to the size of the paper.
Cause 2
Have you specified the correct stack bypass paper size?
Remedy
Specify the correct stack bypass paper size.
Cause 3
Is the ROTATE PRINT mode set to 'OFF'?
Remedy
Set the ROTATE PRINT mode to 'ON'.
When Problems Occur during Fax Operations
10
10-11

Advertisement

Table of Contents
loading

Table of Contents