Routine Cleaning; Platen Glass And Cover - Canon imageCLASS 2300 Basic Manual

Routine Cleaning

If the original is not copied clearly, clean the following parts of the machine. For high
quality output, we recommend cleaning these parts once a month.
Platen Glass
Underside of the Feeder
Feeder Scanning Area
Roller
WARNING
When cleaning the machine, first turn OFF the main power switch and
disconnect the power cord. Failure to do so may result in a fire or electrical
shock.
Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing
so might result in plastic parts becoming deformed.
Disconnect the power cord from the power outlet regularly, and clean the area
around the base of the power plug's metal pins and the power outlet with a dry
cloth to ensure that all dust and grime is removed. If the power cord is
connected for along period of time in a damp, dusty, or smoky location, dust
can build up around the power plug and become damp. This may cause a short
circuit and result in a fire.
9

Platen Glass and Cover

Clean the platen glass and the platen glass cover by following the procedure below.
IMPORTANT
If the platen glass or the platen glass cover is dirty, the original may not be scanned
cleanly, or the size of the original may be detected incorrectly.
9-10

Routine Cleaning