Table of Contents
Advertisement
Using FCode
Flashing the Adapter with Fcode
To update the your adapter's Fcode, use the qla2x00flash utility.
Use the following procedure to flash the adapter with Fcode.
1. Copy the qla2x00flash file and ifp2200.prom file to the desired directory.
CAUTION: Make sure you want to change the Flash contents. Incorrect data in the
Flash contents can render the adapter unusable, and disrupt the operating system
function.
2. Enter the
following example:
qla2x00flash -l /devices/pci@1f,0/pci@1/QLGC,qla@4:devctl
ifp2200.prom
A–2
command with the appropriate path, as shown in the
qla2x00flash
FCA2257C cPCI Host Bus Adapter for Sun Solaris Installation Guide
Advertisement
Table of Contents
