Compaq StorageWorks FCA2257C Installation Manual page 15

System configuration information appears, The following example shows that the
Receptacle column for the shaded row changes to connected:
Ap_Id
N0.IB6
N0.IB8
N0.SB0
N0.SB2
c0
pcisch0:sg6slot2
pcisch0:sg6slot3
pcisc1:sg6slot0
pcisch2:sg6slot4
pcisch2:sg6slot5
pcisch3:sg6slot1
8. Connect the appropriate cables from the FC devices to the J2 and J3 connectors.
9. Check the adapter hot swap LED; it should be off, indicating that the adapter is
active.
If you are unable to successfully install the adapter, refer to Chapter 3 for
troubleshooting information.
FCA2257C cPCI Host Bus Adapter for Sun Solaris Installation Guide
Type Receptacle
CPCI_I/O_b connected
o
unknown empty
CPU_Board connected
CPU_Board connected
scsi-bus connected
stpcipci/fhs connected
unknown empty
unknown empty
stpcipci/fhs connected
unknown connected
unknown empty
Installing the Adapters
Occupant Condition
configured ok
unconfigured unknown
configured ok
configured ok
configured unknown
configured ok
unconfigured unknown
unconfigured unknown
configured ok
unconfigured unknown
unconfigured unknown
2–5