Table of Contents
Advertisement
Installing the Adapters
11. Enter Y to continue the driver installation. The pkgadd program notifies you when
the driver installation is complete, as shown in the following example:
Installing QLogic QLA2200 driver as <QLA2200-3>
## Installing part 1 of 1.
/kernel/drv/qla2200
/kernel/drv/qla2200.conf
[ verifying class <none> ]
## Executing postinstall script
Installation of <QLA2200-3> was successful.
12. If you are not installing the adapter with a Compaq storage platform kit, edit the
qla2200.conf file that resides in the
NOTE: When you install a Compaq Storage platform kit, these values are automatically
changed. If you are using a Compaq Storage platform kit, skip this step and go to step 13.
Compaq has tested with and recommends that you change the values in the
qla2200.conf file as follows:
hba0-max-frame-length=2048;
hba0-max-iocb-allocation=64;
hba0-execution-throttle=16;
hba0-login-timeout=8;
hba0-login-retry-count=8;
hba0-fabric-retry-count=90;
hba0-port-down-retry-count=90;
hba0-connection-options=1;
hba0-device-configuration-mode=1;
hba0-command-completion-option=0;
hba0-persistent-binding-configuration=1; (You can keep the existing value of 0
for this parameter if you want to bind to all devices in the SAN.)
13. Reboot the system to implement your changes, as shown in the following
example:
reboot -- -r
2–8
/kernel/drv/ directory.
FCA2257C cPCI Host Bus Adapter for Sun Solaris Installation Guide
Advertisement
Table of Contents
