Table of Contents
Advertisement
If paper curls after printing, remove it immediately; otherwise, paper jams
may occur.
Depending on the density of your printed pages, the ink may need time to
dry. Within two to three seconds, the ink becomes smudge resistant. After
drying for several minutes, the ink becomes water resistant.
Do not try to load paper into the sheet feeder beyond the paper limit mark
( ) or the tab on the right side of the sheet feeder; stacking too much paper
may cause paper feeding or printing problems.
Make sure there are no gaps between the stack of paper and the paper guide
nor the right edge of the sheet feeder.
Manually Feeding Paper
You use the manual feed function when printing on heavier-weight print media
(17 lb to 143 lb, 64 g/m
Prepare the printer.
Make sure the printer is turned
on.
Press the paper thickness
lever down to the envelopes
position A.
Chapter 3
Paper Handling
2
2
to 500 g/m
, or paper thickness up to 0.6 mm).
3-9
Advertisement
Table of Contents
