Table of Contents
Advertisement
Follow the instructions on the screen.
A message appears warning you NOT to start another operation until deep print
head cleaning is finished. Click the OK button.
The BJ Printer Status Monitor displays a message during deep print head
cleaning.
The
light flashes during print head deep cleaning and then lights again
POWER
when deep cleaning is complete.
Deep print head cleaning takes about one to two minutes.
To check the print heads, print the Nozzle Check Pattern (see page 4-5).
If the problem has not been corrected after deep cleaning the print head four or
five times, it's time to replace the BJ cartridge.
BJ Cartridge Guidelines
The printer's cartridge holder holds two BJ cartridges. The BC-31 Color BJ Cartridge
is installed on the right side at all times. In the left slot, you can install the BC-30 Black
BJ Cartridge or a BC-32 Photo BJ Cartridge.
BJ Cartridge and BJ Tank Maintenance
The most important thing you can do to extend the life of your printer and to
ensure optimum print quality is take care of the BJ cartridges.
Spilled ink can stain any surface. Open BJ cartridges and BJ tanks carefully, and
follow the guidelines presented here to protect against spilled ink.
When a BJ tank runs out of ink, replace it immediately. Do not leave an empty
BJ tank in a BJ cartridge installed in the printer.
Protect all surrounding surfaces (such as floors, furniture, and clothing) before
opening any BJ cartridge or BJ tank.
To avoid spilling ink, do not drop or shake BJ cartridges or BJ tanks.
4-10
Maintaining the Printer
Chapter 4
Advertisement
Table of Contents
