Canon BJC-6000 User Manual page 48

Canon bjc-6000: user manual
Hide thumbs Also See for BJC-6000:
Table of Contents

Advertisement

Load the fabric sheet.
Insert the sheet with the cloth
side out (toward you) and the
open end up (away from the
sheet feeder).
Align the right edge of the
sheet with the right side of the
sheet feeder.
B
.
Adjust the paper guide to the
edge of the fabric sheet.
Set up the printer driver.
In the Main tab, select Fabric Sheet for Media Type.
In the Paper tab, select Letter or A4 for the Page Size.
Close the printer driver and start the print operation from your Windows
application.
Dry and then wash the fabric sheet.
Remove the fabric sheet as it is ejected from the printer.
Let the printed fabric sheet set for about one hour to allow the ink to
completely dry.
Do not touch the printed side until the ink is completely dry.
When dry, peel the film backing from the printed fabric sheet.
Wash the printed fabric sheet for about three minutes under lukewarm running
water to remove extra ink.
Hang the fabric sheet up to dry it again.
Iron the dried fabric sheet with a clothes iron.
Chapter 3
Paper Handling
PAPER THICKNESS
LEVER
PAPER OUTPUT TRAY
AND EXTENSION
PRINT SIDE UP
3-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Color bubble jet bjc-6000 series

Table of Contents