Aligning The Print Head - Canon PIXMA MX700 Series Quick Start Manual

Aligning the Print Head

If ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
1
Make sure that the machine is turned on, open the Paper Output Tray, and extend
the Output Tray Extension.
2
Load two sheets of A4 or Letter-sized plain paper in the Rear Tray or the Front
Tray.
3
Press the Feed Switch button to select the paper source where you have loaded
paper.
4
Print the Print Head Alignment Sheet.
(1) Press the Menu button.
(2) Press the [ or ] button to select Maintenance/settings, then press the OK button.
The Maintenance/settings screen is displayed.
(3) Press the [ or ] button to select Maintenance, then press the OK button.
The Maintenance screen is displayed.
(4) Press the { or } button to select Manual head align and then press the OK button.
The confirmation screen is displayed.
Note
If you select Head alignment print, the machine exits the process after printing the current
head position adjustment values.
(5) Press the { or } button to select Yes and then press the OK button.
The print head alignment pattern is printed.
5
When the print head alignment pattern is
printed, select Yes, then press the OK button.
The input screen for the head position adjustment
values is displayed.
Routine Maintenance 91