Canon PIXMA MX700 Series Quick Start Manual page 101

Cleaning the Paper Feed Roller of the Front Tray
1
Turn off the machine.
2
Load five or more sheets of A4 or Letter-sized plain paper in the Front Tray.
Note
Paper is loaded to aid the cleaning process and will not be printed on.
3
Hold the Rear Cover Lever and then press to
the right and pull to remove the Rear Cover.
Note
If you are not sure which part is the Rear Cover of the
machine, refer to "Rear View" in "Main Components" of
'
the User s Guide on-screen manual.
4
Rotate the paper feed roller toward you using
a cotton swab or the like to wipe off dust or
stain.
Do not touch the roller with your fingers; rotate it
with the cotton swab.
Important
Be sure not to touch the cleaner (A).
Note
If the dirt is hard to remove, slightly moisten the tip of the cotton swab with water.
Paper loaded in the Front Tray will gradually feed and eject as you rotate the roller. Remove
ejected paper. If you run out of paper while cleaning, reload the paper in the Front Tray.
5
Reattach the Rear Cover.
Hold the Rear Cover so that the Rear Cover Lever
comes to the left. Align the protrusions at the right
edge of the cover with the slots at the rear of the
machine and press on the lever to reattach the
Rear Cover.
Important
Press firmly on the Rear Cover on the rear of the machine until it is locked in place. If the Rear
Cover is not reattached properly, paper may not be fed properly and cause paper jams.
Routine Maintenance
(A)
97