Canon PIXMA MX700 Series Quick Start Manual page 27

Tab 2
You can specify whether to enable automatic intensity adjustment.
(5) Auto intensity
Specify whether the intensity is adjusted automatically.
When Auto intensity ON is selected, Auto will be displayed above the intensity slide bar
in the Copy standby screen.
Important
You can change the intensity by pressing the [ or ] button even when Auto intensity ON is
selected. To enable auto intensity again, move the cursor to the center of the slide bar.
Note
Automatic intensity adjustment is set back to off when the machine is turned off.
Automatic intensity adjustment is not available when scanning originals from the ADF.
(5)
Copying 23