Using The Platen Glass - Canon PIXMA MX700 Series Quick Start Manual

Using the Platen Glass

1
Lift the Document Cover.
2
Load the original with the side to be copied, scanned, or faxed faced down on the
Platen Glass.
To make copies or scan documents
Place the original in landscape orientation and
align the upper corner of it with the alignment mark
as shown in the figure on the right.
Note
The machine cannot scan the shaded area in the figure below.
(A)
(A) 0.04 inches / 1 mm
For details about making copies, see "Copying" on page 21.
For details about scanning images, see "Scanning Images" on page 34.
When copying, the machine scans the printable area of the specified printout paper. Refer
to "Printing Area" in the User's Guide on-screen manual.
To scan photographs
Place the photograph at least 0.4 inches / 10 mm
away from and in square with the edges of the
Platen Glass.
(A)
(A) 0.4 inches / 10 mm
Before Using the Machine
(A)
7