Canon PIXMA MX700 Series Quick Start Manual page 19

2
Prepare to load paper.
(1) Open the Rear Tray, then pull out the Paper
Support.
Put your finger in the rounded indent of the
Paper Support and pull it out until it stops.
(2) Open the Paper Output Tray.
(3) Extend the Output Tray Extension.
(4) Press the Feed Switch button so that the Rear
Tray lamp (A) lights.
Note
You can also select the paper source with the printer driver.
For details, refer to the PC Printing Guide on-screen manual.
3
Load the paper.
(1) Load the paper in the Rear Tray with the print
side facing UP.
(2) Align the paper stack against the Cover Guide
on the right side of the Paper Support.
Note
Make sure that the Cover Guide is set upright
when you load paper in the Rear Tray.
(3) Slide the Paper Guide against the left side of
the paper stack.
4
Specify the page size and media type settings according to the loaded paper.
Note
When performing copy direct printing without using a computer, select the size and type of the
loaded paper using the Operation Panel.
For details on settings, see "Setting Items" on page 22 or "Setting Items" on page 30.
When using the machine connected to a computer, select the size and type of the loaded paper
in Page Size (or Paper Size) and Media Type in the printer driver.
For details on printer driver settings, see "Printing with Windows" on page 32 or "Printing with
Macintosh" on page 33.
(A)
(4)
(3) (2)
(3)
* Do not load higher than the Load Limit
Mark (A).
Before Using the Machine
(1)
(A)
(1)
(2)
15