Setting The Receive Mode - Canon PIXMA MX700 Series Quick Start Manual

Setting the Receive Mode

1
Display the FAX menu.
See "Display the FAX menu." on page 45.
2
Display the Receive mode settings screen.
(1) Press the [ or ] button to select Receive mode settings, then press the OK button.
3
Select a receive mode.
(1) Press the { or } button to select a receive mode, then press the OK button.
Press the Back button to exit the FAX menu.
The receive mode (A) will be displayed on the LCD.
Setting the DRPD Ring Pattern
If you subscribe to a Distinctive Ring Pattern Detection service with your telephone company,
your telephone company will assign two or more telephone numbers with distinctive ring patterns
to your single telephone line, allowing you to have different numbers for fax calls and voice calls
using only one telephone line. Your machine will automatically monitor incoming calls based on
the ring pattern, and will automatically receive the fax if the call is a fax call.
To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern
assigned by your telephone company.
Note
Contact your local telephone company for detailed information on this service.
(A)
Faxing 69